Sanyo LCD-27XA2 Instruction Manual page 18

Menu Operation
Setting of the Skip Channels
Setting of the Skip Channels
If there are positions you do not use, by set-
ting skip channel function, it is possible to
jump over any position when you are select-
ing a channel using the Programme Up/
Down button.
1
1
Select "Position" in the Semi menu.
Semi Semi
Frequency
Position
System
Sound
Skip
Memory
2
2
Select programme position you want to
skip.
To select desired programme position:
Press the Digit (-/--) button and enter
the position number (000-254) using 0-9
buttons.
Press
position sequentially.
3
3
Select "Skip" with
with or
(To cancel skip channel, set Skip "OFF".)
Semi Semi
Frequency
Position
System
Sound
Skip
Memory
4
4
Select "Memory" with
OK button to memorize.
5
5
Press the MENU button to exit.
18
18
271.65 MHz
007
Auto
BG
OFF
OK?
or
to select programme
, and set Skip "ON"
.
273.25 MHz
010
Auto
BG
ON
OK?
, and press the
Channel Swapping
Channel Swapping
Use this feature to swap the channels
between two stored programme positions.
This feature is particularly useful after auto-
matic tuning.
First of all, you have to select a programme
position you wish to swap. eg. swap pro-
gramme position 3 and 12.
1
1
Select programme position eg. 3.
2
2
Call up the Menu display, and select
"Swap" of the Preset menu with
Preset Preset
Auto Tuning
Prog. Preset
Swap
Fine Tuning
3
3
Enter new programme position number
eg. 12 by pressing 0,1 and 2 numeric
buttons.
4
4
Press the OK button to memorize, and
the programme number disappears.
The channels are now swapped.
5
5
Press the MENU button to exit.
03
AUTO
BG
>
>
- - -
< >
.