Fujitsu fi-5120C Getting Started Manual page 17

5. Click [INSTALL PRODUCTS], and then click
[ISIS Driver].
6. Error Recovery Guide Installation dialog box
appears.
Error Recovery Guide is an application with
which you can view on-screen information for
troubleshooting errors that may occur in the
scanner. This guide helps solve problems, so
select [Yes] to install it. You may also choose
to install it later.
After you select [Yes] for installing Error
ATTENTION
Recovery Guide, the [Choose Setup Lan-
guage] dialog box appears. Select a lan-
guage and follow the on-screen
instructions. The Error Recovery Guide
dialog box is automatically displayed when
the installation is complete. Wait until the
installation of the ISIS starts.
7. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
8. Install the driver, following the on-screen
instructions.
9. When you see the [InstallShield Wizard Com-
plete] dialog box, click the [Finish] button.
fi-5120C/fi-5220C Image Scanner Getting Started
Your computer will restart and detect the scanner. Do
not remove the Setup CD-ROM from the CD drive until
your personal computer completely starts up again.
Depending on the operating system you are
ATTENTION
using, you may need to do the following.
Windows 2000:
If you see the [Digital Signature not Found]
dialog box, click [Yes].
Windows Vista:
If you see the [Found New Hardware] dialog
box, select [Locate and install driver soft-
ware], and then in the [User Account Control]
dialog box, click the [Continue] button, if it is
displayed.
Now the installation of the scanner driver is completed.
■ Installing QuickScan Pro™
QuickScan Pro TM is image capturing software based on
the ISIS standard. By using this software together with
FUJITSU ISIS, you can scan documents with the scan-
ner. Follow the procedure below to install the trial ver-
TM
sion of QuickScan Pro
Be sure to log on as a user with "Adminis-
ATTENTION
trator" privileges.
1. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK STARTUP SCREEN>
appears.
2. Click [INSTALL PRODUCTS], and then click
[QuickScan Pro (Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.5] dialog box, click the [Next] but-
ton.
that comes with this scanner.
8