User Guide NEWTEAM 1500-XT THERMOSTATIC POWER SHOWER IN THE EVENT OF ANY QUERY PLEASE CONTACT THE NEWTEAM CUSTOMER HELPLINE Tel : 01536 264 012 PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE DEAR INSTALLER WHEN YOU HAVE READ THESE INSTRUCTIONS...
INSTALLER NOTES GUARANTEE Refer to back cover for Guarantee, Customer Service and Replacement Parts Policy. In the event of any query regarding installation please contact the NewTeam Customer Service Department Tel: 01536 264 012 • Fax: 01536 409 201 E-mail: service@newteam.co.uk • E-mail: spares@newteam.co.uk In line with our policy of continual product development the specifications may be varied and product design altered.
For correct operation of the NewTeam 1500-XT power shower, both hot and cold water supplies must be gravity fed, at nominally equal pressures, from a cold water storage tank, and a hot water storage cylinder.
• Do not seal the edge of the unit to the tiled surface with any sealant, as the gap below the back of the unit and the tiles is needed for ventilation. • The outlet connection must be positioned at the bottom of the unit. NEWTEAM 1500-XT...
Where chrome plated tube is Fig 3 Fixing points - 1500-XT used, roughen or remove the first 25mm of plating • The inlet elbows supplied are of a standard length, in some cases these will need to be shortened for correct installation.
Recessed Fitting Pipework 1) If the pipework is to be recessed, it should be let into the wall with the ends of the Fig 6 - 1500-XT hot and cold pipes standing 40mm off the finished surface of the wall, and centres 40mm apart, with the cold above the hot.
Fig 7 - Riser Rail NOTE: The hose nut, and not the handset handle, fits into the slider, and the slider moves more freely on the rail if gripped next to the rail, rather than at the handset. NEWTEAM 1500-XT...
Boost Button aligned. Adjust if necessary. This sets the shower temperature to 38-40ºC, with the control knob pointing to “12 o’clock”, if the hot water is at the recommended 60ºC. Fig 8 - NT 1500-XT Power Shower NEWTEAM 1500-XT...
6) The handset has 3 spray modes, which are selected by rotating the bezel around the spray head. Fig 9 - NT 1500-XT Power Shower 7) Do not at anytime use bath cleaning liquids, powders or specified scratch cleaners on any surface finishes. In order to avoid surface wear or chemical attack on any of your shower fittings when cleaning, always use a damp cloth.
For your guarantee to be valid, your shower pump must be installed by a competent person, in accordance with the instruction manual. NewTeam will repair or replace (at our option), free of charge, any faulty components during the guar- antee period, provided it has been maintained and operated in accordance with our instructions, and has not been misused or damaged.
Page 15
5. Please state your main reason for purchasing the 1500-XT Power Shower: NewTeam Product Knowledge Product Features Product Styling Price Other (please specify) ______________________________________________________________ Please tick here if you do not require any further information or product updates from NewTeam POST BACK FOLD AND TAPE AS INSTRUCTED OVERLEAF NEWTEAM 1500-XT...
Need help?
Do you have a question about the 1500-XT and is the answer not in the manual?
Questions and answers