User Guide NEWTEAM 1000-XT THERMOSTATIC POWER SHOWER IN THE EVENT OF ANY QUERY PLEASE CONTACT THE NEWTEAM CUSTOMER HELPLINE Tel : 01536 264 012 PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE DEAR INSTALLER WHEN YOU HAVE READ THESE INSTRUCTIONS...
Page 2
Product Features NewTeam 1000-XT • Integral pump • Push-fit fittings • 3 spray massage handset with rub-clean feature • Thermostatic temperature control • Push button stop/start • BEAB approval of safety NEWTEAM 1000-XT...
INSTALLER NOTES GUARANTEE Refer to back cover for Guarantee, Customer Service and Replacement Parts Policy. In the event of any query regarding installation please contact the NewTeam Customer Service Department Tel: 01536 264 012 • Fax: 01536 409 201 E-mail: service@newteam.co.uk • E-mail: spares@newteam.co.uk In line with our policy of continual product development the specifications may be varied and product design altered.
Under no circumstances should the unit be connected directly to the mains cold water supply, or to a combination boiler, or pressurised hot water system. For correct operation of the NewTeam 1000-XT power shower, both hot and cold water supplies must be gravity fed, at nominally equal pressures, from a cold water storage tank, and a hot water storage cylinder.
• Do not seal the edge of the unit to the tiled surface with any sealant, as the gap below the back of the unit and the tiles is needed for ventilation. • The outlet connection must be positioned at the bottom of the unit. NEWTEAM 1000-XT...
Note: If the electrical supply cable is concealed in the wall ensure that it avoids Back Feed 63mm are to be taken the unit’s fixing points so that fixing screws do not pierce the cable. from these points NEWTEAM 1000-XT...
Note: The hose nut, and not the handset handle, fits into the slider, and the slider moves more freely on the rail if gripped next to the rail, rather than at the handset. Fig 6 - Riser Rail NEWTEAM 1000-XT...
Adjust if necessary. This sets the shower temperature to 38-40ºC, with the control knob pointing to ‘12 o’clock’, if the stored hot water is at the recommended 60ºC. NEWTEAM 1000-XT...
Unit may be incorrectly Check that the top installed of the shower unit is at least 75 mm below the base of the cold-water tank If in doubt please call the NewTeam helpline: 01536 264012 NEWTEAM 1000-XT...
Spare Parts Listing NewTeam 1000-XT Item No. Part No. Description Finish SP-087-0603 Base assembly*# White or matt chrome SP-087-0604 Front cover*# White or matt chrome SP-087-0110 Pump unit Not applicable SP-087-0035 Motor cover Not applicable SP-087-0127 Pipe connection Not applicable...
The registration of your personal details is purely for Newteam use, and the other information helps us to make products for the future. NewTeam Shower products are designed, manufactured and tested to the highest standards.
Page 15
5. Please state your main reason for purchasing the 1000-XT Power Shower: NewTeam Product Knowledge Product Features Product Styling Price Other (please specify) ______________________________________________________________ Please tick here if you do not require any further information or product updates from NewTeam POST BACK FOLD AND TAPE AS INSTRUCTED OVERLEAF NEWTEAM 1000-XT...
Need help?
Do you have a question about the 1000-XT and is the answer not in the manual?
Questions and answers