Component Type - LeCroy ArbStudio Manual

Component Type

The Type menu allows selecting the component among a list of possible signals or functions.
Depending on the selected Type, different parameter may be edited. The different possibilities include the
following:
Type
DC Level Offset [V]
Sine Frequency[Hz/cycles], Amplitude[V], Phase[°], Offset[V]
Cosine Frequency[Hz/cycles], Amplitude[V], Phase[°], Offset[V]
Triangle Frequency[Hz/cycles], Amplitude[V], Phase[°], Offset[V]
Rectangle Frequency[Hz/cycles], Amplitude[V], Phase[°], Offset[V], Duty Cycle [%]
Saw tooth Frequency[Hz/cycles], Amplitude[V], Phase[°], Offset[V]
Increase Ramp Amplitude[V], Offset[V]
Decrease Ramp Amplitude[V], Offset[V]
Pulse Amplitude[V], Delay[s], Width[s], Offset[V]
Sinc Amplitude[V], Offset[V], Peak Position[s], Lobe Width[s],
Exponential Frequency[Hz/cycles], Vo[V], Vinf[V], Time Constant[s]
Sweep Amplitude[V], Offset[V], Start Frequency[Hz], Stop Frequency[Hz]
Formula Calculator Window
From File Explorer Window
The Formula type allows defining the component by means of a mathematical expression.
The component is edited by using the Formula Editor window that can be activated by clicking the Edit Formula
button. The mathematical expression can be a function of time or a function of samples by using the t or x
variables, respectively.
918221 RevA
Available Parameters
Getting Started Manual
59