[Rec & Event Setup] - Panasonic WJ-ND300 Setup Instructions

[Password]
Set the password for accessing the cameras and log-
ging in. Enter up to 32 alphanumeric characters.
[TIME ZONE]
Displays the time zone of the camera.
[Camera Setup]
Clicking the [SET] button of the desired camera will
open the camera setting menu. Opening the camera
setting menu is possible only if [Comm] – [Basic Setup]
- [Port Forwarding] on the setup menu (Advanced) are
set to "ON".
[Rec & Event Setup]
Perform the settings for the basic recording and the settings for event actions of each event type (camera site alarm,
terminal alarm and command alarm).
Screenshot 1
Click "Rec & Event Setup" on the setup menu (Quick) to
display the recording & event setup window.
I
Group Setup
Displays the group title of the camera. The following
window will be displayed when the [SETUP] button is
clicked.
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.
Displays the group title of the camera. Enter up to 16
alphanumeric characters.
Available characters are the same as for the camera
title.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
31