Network Disk Recorder IP Quick Setup Tool Operating Instructions WJ-ND300 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Limitation of Liability ... 3 Disclaimer of Warranty ... 3 Precaution ... 3 Preface ... 4 System Configuration ... 4 System Requirement for a PC ... 5 Trademarks and Registered Trademarks ... 5 Abbreviations ... 5 Start/exit the software ... 6 Main window ...
Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
Preface By using this software, the following settings of the digital disk recorder WJ-ND300 can be configured on a PC via a network. • Network settings • Registration of cameras, and deletion/edit of the registered cameras IP addresses of the cameras connected to the WJ-ND300 can be automatically assigned with this software.
System Requirement for a PC This software is operable when installed on a PC that meets the following system requirements. Microsoft Microsoft Microsoft ® Intel Pentium Memory 512 MB or more Monitor 1024 x 768 pixels or more Network interface 100 Mbps Network interface card must be installed ®...
Start/exit the software Start: Double-click the "IP Quick Setup Tool" icon (ND300IPsetup.exe) to start this software. The software will start and the main window will be displayed. Exit: Click the [Exit] button on the main window or the [x] button at the top right of the window to exit the software. Notes: •...
Main window Tree display area Tree display area Icons of the detected recorders and cameras will be displayed and their IP addresses and MAC addresses will be displayed. (When failed to detect the camera, its MAC address will not be displayed.) Refer to the next page for fur- ther information about the icons.
(33rd or later) (Settings changed) Description Indicates the network disk recorder WJ-ND300. (Normal display) This icon will be displayed when number of the detected cameras that are connected to the recorder is 33 or more. Indicates a camera whose network information is not registered in the recorder.
Operation flow The following settings can be configured with this software. • Network settings of the recorder (Camera port, client PC port) • Camera network settings of the recorder (Camera registration for each channel) • Network settings of the cameras connected to the recorder (IP address, etc.) Configure the network settings of the recorder/camera as follows.
Page 10
The settings for the recorder/camera will be different as follows according to how the registration is made ("CAM IP Auto Addressing" or "Manual Registration"). Setup item DHCP setting Camera port IP address Subnet mask DHCP setting Client PC port IP address Subnet mask Default gateway Recorder...
Detect recorders/cameras and confirm the current settings The detected recorders/cameras will be displayed with icons. The current network settings of the selected recorder/camera will be displayed in the network setting area. Screenshot 1 Start operation when displaying the main window. Screenshot 2 The search processing window will be displayed, and then the search result will be displayed.
Page 12
Screenshot 3 The network settings of the selected recorder/camera will be displayed. Notes: • When "ON" is selected for the host authentication function on the recorder, it is impossible to search recorders using a PC that is not allowed to edit the network settings of the recorder.
Arrange the camera number by moving/deleting the camera icon The camera numbers will be assigned to each camera channel of the recorder in order of the camera icons dis- played in the tree display area. The camera numbers can be changed by changing the order of the icons in the tree display area. By deleting the icons of the cameras from the tree display area, the deleted camera will not be registered.
Delete a camera icon Screenshot 1 Start operation when the search result is displayed on the main window. Screenshot 2 The settings of the selected camera will be displayed. Step 1 Click to select the icon of the camera not to be used with the recorder.
Page 15
Screenshot 3 The selected camera icon will be deleted. Notes: • When the selected icon is deleted, the camera icons below the deleted icon will move up. However, the camera number of the camera regis- tered with the host name (displayed with " not be changed.
Edit the settings Edit the network settings of the recorder/camera such as IP address. Screenshot 1 Start operation when the search result is displayed on the main window. Step 1 Edit the network settings of the recorder/camera such as IP address. Step 2 Click the [Set] button after editing the settings.
Register the recorder and cameras, and confirm the result (CAM IP Auto Addressing) Register the edited settings in the recorder and the automatically assigned IP addresses in the cameras. Screenshot 1 Start operation when the search result is displayed on the main window.
Page 18
Screenshot 2 The registration processing window will be displayed, and then the registration result will be displayed.
Register the recorder and cameras, and confirm the result (Manual Registration) Register the edited settings in the recorder and the camera. When not registered, the edited settings will not be applied to the recorder. Screenshot 1 Start operation when the search result is displayed on the main window.
Page 20
Screenshot 2 The registration processing window will be displayed, and then the registration result will be displayed. Step 4 Confirm the registration result. Display live images from the camera and confirm that they are normally dis- played. Notes: • Display live images from the camera and confirm that they are normally displayed.
Tips to configure the settings When having a problem to configure the settings with this software, check and try the solution described below. Problem Need to register the network settings of the newly detect- ed camera without chang- ing. The cameras with the same MAC address are displayed with the icons.
[Available] button of "IP Setup Tool" on the "NW Camera Setup" page (under the "Camera" page of the WJ-ND300 setup menu. The recorder can be detected only for 20 minutes. • Isn’t the host authentication function set to "ON"?
Page 23
To apply the settings, reboot the camera. • When multiple recorders are used, some models can- not be detected correctly. (Some recorders may detect them and some may not.) In this case, register the camera using the WJ-ND300 setup menu. Reference pages...
Page 24
Security Systems www.panasonic.com/security http://panasonic.net For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630...