For Husqvarna Parts Call 606-678-9623 or 606-561-4983
9
Insert tool no. 506 56 76-01 into the centre of the
engine pulley. Unscrew and remove the socket
head cap screw which holds the pulley and the
engine axle together. Use tool no. 506 89 92-01 as
a holder-on. Remove the pulley from the engine
axle.
10
Remove the engine attachments, two on each side
of the engine, and remove the engine from the
mower.
506 56 76-01
www.mymowerparts.com
Replacing engine
IMPORTANT INFORMATION
When installing the engine, it is important
that the pulley groove (1) is in a position
so the outgoing axle key (2) fits into the
groove (see diagram). Also check that
both spacing collars (3) and the key (2) are
firmly attached on the engine axle. Grease
the engine axle.
1
Lower the engine and tighten the engine
attachments (two on each side of the engine) with
moment (25 Nm). The battery's minus cable should
be connected to the front left screw.
Reparation instructions
23
Svenska –