Putting The Handset Into Service; Removing The Protective Cover; Ex Protection And Ip Rating Compliance - Siemens Gigaset M2 Professional Operating Manual

Putting the handset into service

Removing the protective cover

Remove the protective cover from the display before
putting the handset into service.

Ex protection and IP rating compliance

(Ex protection only applies to Gigaset M2 Ex professional)
Inserting the battery compartment seal
Insert the battery compartment seal carefully (around the battery compart-
ment).
Inserting the plug into the charging socket
Insert the plug into the Slim Lumberg jack on the underside of the handset.
Only remove the plug when charging the handset, connecting a wired
headset or connecting a data transfer cable.
Removing this plug cancels the Ex protection and IP rating.The hand-
set should only be operated in this condition in permitted zones.
Putting the handset into service
15