ritetemp 6020 Operation Manual

Operation 6020

TEMP
UP button
HE AT
TEMP DOWN button
1
PG

Configure

Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the
Room temperature. Set the Fan switch to AUTO.

Operate

Press the TEMP UP and TEMP DOWN buttons to select the desired
temperature. The TARGET icon will be displayed with your desired
temperature. (Display will return to room temp in 5 sec).
In the winter, set the system switch to HEAT to control your heating system.
In the summer, set the system switch to COOL to control your AC.
In spring and fall or when windows are open,
you can set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your system's fan during
heating and cooling.
Setting the FAN switch to ON runs your system's fan continuously even
without heating or cooling.
Temperature
HEAT/COOL
Display
Mode Switch
Fan
Switch
Farenheit/Celcius
indicator
ROOM TEMP
Current Temperature
Display
Statement of use: The 6020 can be used with millivolt,
24VAC, 1 and 2 stage conventional gas/oil/elec heat, 1 and 2
stage heat pumps, 2 or 3 wire zoned hot water, zoned forced
air, 1 and 2 stage cooling and hybrid systems.
It cannot be used with 120 volt heating systems.
TARGET TEMP
SET Temperature
Display
PG
2