Testing the Liquid Crystal Display
Procedure
HCXTD840, Issue 1, July 2001
You can test your LCD to make sure all areas are active.
1
Press and hold the <LCD> key.
2
The active areas of the display are shaded. The shaded
area should form a complete rectangle, as shown in
Figure
A-10. If you detect areas of the display that are
inactive, contact your telephone equipment service
provider.
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
***************************************************
Figure A-10: Display LCD test
You can exit the test mode at any time by returning the
TEST switch to its original position.
T
L
ESTING THE
IQUID
C
D
RYSTAL
ISPLAY
A-13