Zoom 9000 Operation Manual page 36

Using the PATCH 1 to 4 key, select the desired Patch number.
% M % =
The same as the operations on the panel of the
9000,
the Patch is not changed when the Bank
is changed. The selected Patch is activated when you press the PATCH key.
Bypassing
the Effects
*
Step on the
BANK
switch several times until the
LED of
the
FCOl displays "P."
The LED starts flashing.
Press one of the PATCH 1 to 4 key.
The LED stops flashing, and the
9000
shows the bank before entering the Bypass status. The
BYPASS
LED light up.
FCO l 9000
I
BANK PATCH
I
I-
BANK PATCH
I
Bypass Operation
To release the 9000 from
the Bypass status, using the
BANK and PATCH keys of the FCO1,
select either of the following Patches.
W =
The
9000
can be remotely controlled from the FCOl only when it is put in the Play mode.
When the
9000
is put
in another mode, the LED of the FCOl flashes, and selection of the
Patches and on/off of the Bypass function are disabled.