Table of Contents
Advertisement
Set AV Control
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions
from an external home control system.
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move
Select
SEL
Use the CURSOR buttons and the SELECT button to check the Connected RS232C box.
NOTE:
For use with third party home Audio/Video control systems which are commercially available. Please see your dealer
regarding these "non Hitachi" home control systems.
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please com-
plete and return the warranty card.
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Move
Select
SEL
Insert MMC card, then press the CURSOR buttons
upgrading.
NOTE:
Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Quick Start Up
This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting
ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in "standby mode" which
is commonly referred to as "off". This will allow you to quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor any changes and prepare the television to quickly
present a picture. A small amount of electricity is used to continually monitor signals when this feature is
selected.
Setup
CableCARD Info
Set AV Control
Upgrades
Quick Start Up
Select
Move
SEL
NOTE:
At initial TV Turn "ON", the Power button LED will blink several times before a channel can be tuned and viewed. This is
a normal default operation of this television. The blinking time of the Power button LED varies depending on the period
of time between when you turn "ON" and when you turn "OFF" the TV. This default operation is an energy saving feature.
You can choose not to use this feature by selecting "On" for the "Quick Start Up" option in the On-Screen-Display Menu.
Select "Setup" in the On-Screen-Display Menu, then select "Quick Start Up". Select the "On" feature to quickly tune and
view channels at initial TV Turn "ON."
Setup
Set AV Control
Setup
Upgrades
Software Version #: Main
MMC Software Upgrade
Please insert MMC card
before upgrading.
Move
,
to highlight "Upgrade Now". Press the SELECT button to select and start
Setup
Quick Start Up
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity.
Off
Move
64
If you want to use the AV Control
function, please set the RS232C.
Connected RS232C
Move
Return
SEL
VXX.XX
Upgrade Now
Return
SEL
On
Return
SEL
SETUP
Hide quick links:
Advertisement
Table of Contents
