Channel Manager; Auto Channel Scan - Hitachi 51F710 Operating Manual

Chan.
Manager
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Move Sel
SEL
Press the CURSOR buttons
Set The Antenna
This feature will select Antenna options.
Chan. Manager
Set The Antenna

Auto Channel Scan

Signal Meter
Channel List
Move Select
SEL
Press the CURSOR buttons
NOTE: When a CableCARD is installed, antenna settings will be set automatically to "Connect Cable to Ant A only".
Auto Channel Scan
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Move Select
SEL
Press the CURSOR buttons
Press the CURSOR buttons
Press the SELECT button to select.
NOTE: When a CableCARD is installed, Auto Channel Scan will not be available.
, to highlight function, the press the SELECT button to select.
, to highlight function, the press the SELECT button to select.
This feature will automatically store active TV channels in Auto Channel Scan memory.
, , , to highlight Ant A or Ant B.
, to highlight the Start or Clear option.

CHANNEL MANAGER

Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Move Return
SEL
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1)
Move Return
SEL
Chan. Manager
Auto Channel Scan
Ant A
Auto Channel Scan
Start
Ant B
Auto Channel Scan
Start
Move Return
SEL
44
Cable(2)
Clear
Clear