Central Pneumatic 47016 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Paint Sprayer
  5. 47016
  6. Owner's manual & safety instructions

Central Pneumatic 47016 Owner's Manual & Safety Instructions

20 oz. high volume, low pressure gravity feed spray gun
Hide thumbs Also See for 47016:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
20 oz. high volume, low pressure
gravity feed spray gun
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun
IMMEDIATELY after use.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.
Visit our website at: http://www.harborfreight.com
REV 12c
Email our technical support at: tech@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2002 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
®
. All rights reserved.
ITEMS 47016 67181
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 47016 and is the answer not in the manual?

Questions and answers

Related Manuals for Central Pneumatic 47016

Summary of Contents for Central Pneumatic 47016

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    Distractions are able to result in fire, and injury to persons. the loss of control of the tool. Page 2 For technical questions, please call 1-800-444-3353. Item 47016 67181...

  • Page 3: Personal Safety

    Use only lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. b. When servicing a tool, use only identical replacement parts. Use only authorized parts. Item 47016 For technical questions, please call 1-800-444-3353. Page 3 67181...

  • Page 4: Air Source

    Risk of Respiratory Injury. Wear NIOSH-approved respirator. Cubic Feet per Minute flow SCFM at standard conditions WARNING marking concerning Risk of Explosion. National pipe thread, tapered National pipe thread, straight Page 4 For technical questions, please call 1-800-444-3353. Item 47016 67181...

  • Page 5: Specifications

    § 25249.5, et seq.) Specifications Maximum Air Pressure 70 PSI Cup Capacity 20 fl. oz. Air Inlet 1/4 IN. - 18 NPS Air Consumption 6 CFM @ 40 PSI Item 47016 For technical questions, please call 1-800-444-3353. Page 5 67181...

  • Page 6: Setup

    5. Turn on the air compressor according to more efficient, but are not required. the manufacturer’s directions and allow it to build up pressure until it cycles off. Page 6 For technical questions, please call 1-800-444-3353. Item 47016 67181...
  • Page 7 7. Inspect the air connections for leaks. measure to attempt to discharge the tool in a Repair any leaks found. safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. Item 47016 For technical questions, please call 1-800-444-3353. Page 7 67181...
  • Page 8 NOTICE Clean the Spray Gun IMMEDIATELY after use. Delayed or inadequate cleaning will permanently clog the Spray Gun. Page 8 For technical questions, please call 1-800-444-3353. Item 47016 67181...
  • Page 9 While these products can be used with directions and mix thoroughly. this Spray Gun, coverage will not be even. 3. Carefully strain the paint through a paint strainer or a piece of cheesecloth. Item 47016 For technical questions, please call 1-800-444-3353. Page 9 67181...
  • Page 10 9. Adjust the air supply pressure during operation with the Trigger fully depressed and the Air Knob fully open. If reducing air pressure for specific areas, use the Air Knob. Page 10 For technical questions, please call 1-800-444-3353. Item 47016 67181...

  • Page 11: Spraying Technique

    7. Clean Spray Gun thoroughly immediately and the other to operate the Spray Gun, after EVERY use, according to aim Nozzle at the workpiece. instructions on the following pages. Item 47016 For technical questions, please call 1-800-444-3353. Page 11 67181...

  • Page 12: Maintenance

    Trigger again to make sure no air remains. b. Flush Spray Gun a full hose length from air compressor. Page 12 For technical questions, please call 1-800-444-3353. Item 47016 67181...
  • Page 13 2. Replace fluid needle spring. 3. Worn or damaged tip. 3. Replace tip and/or needle. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 47016 For technical questions, please call 1-800-444-3353. Page 13 67181...
  • Page 14 Nozzle are plugged. left only 3. Damaged Needle. 3. Have qualified technician replace Needle. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Page 14 For technical questions, please call 1-800-444-3353. Item 47016 67181...

  • Page 15: Parts List And Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 47016 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

67181

Table of Contents

Save PDF