Selecting A 3D Mixing Format - JVC IF-2D3D1 Instructions Manual

Selecting a 3D mixing format

A 3D image is realized by viewing a picture on a 3D-compatible monitor through special glasses with shutters
or polarized filters. The monitor displays images for the left and right eyes at the same time. Each lens produces
an image for the left or right eye only and the eyes see them as a stereoscopic image.
The unit is compatible with four 3D image formats, LINE BY LINE, SIDE BY SIDE H, ABOVE-BELOW and CHECKER
BOARD, that allow for various usage.
The unit executes conversion into any one of the four formats above in real-time.
●
Selectable formats vary depending on the type of input signal.
●
Selectable formats vary depending on the compatibility of the connected devices. Refer also to the instruction
manual or specifications of the connected device to check the compatibility.
LINE BY LINE
SIDE BY SIDE H
ABOVE-BELOW
CHECKER BOARD
L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L
L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R L
Setting
Follow the steps below to select a 3D mixing format.
1
Press OUTPUT PRESET and select 3D MIX FORMAT using
2
Select a setting value using
04
EN
Displays image stripes of the left and right images line by line one after another.
You can maintain the same horizontal resolution as the source when using a monitor with a polarized
filter system.
●
It is recommended to use another format if you use compression for recording images.
Shrinks the size of the left and right images by half and displays them side by side.
The format is compatible with most recent 3D-compatible displays. This format is very convenient
because of its high compatibility with existing recording and transmission systems though the
horizontal resolution is reduced to half.
Shrinks the left and right images by half vertically and displays them top and bottom.
The vertical resolution is reduced to half but the horizontal resolution is free from degradation if you
use a monitor with polarized filter system.
●
The format is available only when MIX is selected both in SDI OUT SELECT and HDMI OUT SELECT of
OUTPUT PRESET.
Displays image blocks of the left and right images one after another in a grid-like pattern.
R L R L R
R L R L
R L R This is an advanced format, which can reduce the feeling of image deterioration.
R L R L R
R L
R L R L
●
R L R It is recommended to use another format if you use compression for recording images.
R L R L R
R L
R L R L
R L R
R L R L R
R L
R L R L
R L R
R L R L R
R L
R L R L
R L R
R L
.
.