Connecting The Floppy Disk Drive Externally; Figure 21 Removing The Hard Disk Drive; Figure 22 Connecting The Floppy Disk Drive Externally - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 56 Friday, March 6, 1998 10:53 AM
4 Connecting and Installing Optional Devices

Figure 21 Removing the Hard Disk Drive

Connecting the Floppy Disk Drive Externally

If the CD-ROM is being used, you can connect the Floppy Disk
Drive to the parallel port with the provided external floppy drive
cable. To make the connection:
Attach the Floppy Disk Drive to the cable and attach the
1.
other end of the cable to the parallel port.
The External FDD is ready to use. You can disconnect
2.
the FDD cable without turning off the system.

Figure 22 Connecting the Floppy Disk Drive Externally

56 SA200