Rear View; Figure 3 Rear View Of The Sa200 - Hitachi SA200 Series Manual

lonestar.boo : sa200.fm Page 7 Friday, March 6, 1998 10:53 AM

Rear View

DC IN Port PS/2 Port

Figure 3 Rear View of the SA200

SA200
Peripheral Bay
This bay is designed to house the floppy disk drive
module, the CD-ROM module or the LS-120 high-
capacity drive module. See "Exchanging the Peripheral
Bay Modules" beginning on page 54 for more
information.
Power Button
Press this button and hold it down for a few seconds to
turn the computer on or off. See "Turning Your Laptop
On" and "Turning Your Laptop Off" beginning on page
17 for more information.
External
Monitor
Serial Port
Port
DC IN Port
Connect the laptop power cable to this jack. See
"Connecting to AC Power" on page 15 for more
information.
PS/2 Port
You can connect an external Windows 95 compliant
keyboard or a PS/2 pointing device to this port. This
port automatically detects which one is connected. See
"Connecting an External Keyboard" on page 48 and
"Connecting an External Pointing Device" on page 47
for more information.
1 Introduction
Expansion
Parallel Port USB Port
Port
7