Dell PowerConnect 5224 System User's Manual page 11

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Switch/General/Asset page.
Command
show system
hostname name
snmp-server contact string
snmp-server location text
Example
Console(config)#hostname Server Chassis 35
Console(config)#snmp-server contact Paul
Console(config)#snmp-server location WC-19
Console(config)#exit
Console#show system
System description: PowerConnect 5224
System OID string: 1.3.6.1.4.1.674.10895.4
System information
System Up time: 0 days, 0 hours, 14 minutes, and 17.93 seconds
System Name : Server Chassis 35
System Location : WC-19
System Contact : Paul
MAC address : 00-00-e8-00-00-02
Web server : enable
Web server port : 80
POST result :
--- Performing Power-On Self Tests (POST) ---
UART Loopback Test ..................... PASS
Timer Test ............................. PASS
CACHE Test.............................. PASS
DRAM Test .............................. PASS
I2C Initialization ..................... PASS
Runtime Image Check .................... PASS
PCI Device Check ....................... PASS
Switch Driver Initialization ........... PASS
Usage
Displays system information
Specifies or modifies the system name for this device
Sets the system contact (sysContact) string
Sets the system location string