DVD-HR773 DVD-HR775 DVD-HR777 user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register...
getting started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION riSK OF ELECTriC SHOCK DO nOT OPEn CAUTION: TO REDUCE THE RISK OF ELECTRIC This symbol indicates “dangerous This symbol indicates important voltage”...
PrECaUTiOn important Safety instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
getting started Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. Do not use benzene, thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth. HDD (Hard Disk Drive) The hard disk has a high storage density, which enables long recording durations and quick access to written data.
Playback may be impossible in some cases due to the condition of recording. This unit can play back DVD±R discs recorded and finalised with a Samsung DVD video recorder. It may not be able to play some DVD±R discs depending on the disc and the condition of the recording.
getting started In both modes, playback can be performed before and after finalisation, but additional recording, deleting and editing can not be performed after finalisation. If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost.
COPY PROTECTION Many DVD discs are encoded with copy protection. Because of this, you should only connect your HDD & DVD RECORDER directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
getting started Do not use the following discs! LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. For a DVD-RW/±R disc, which has been recorded in Video Mode on another component, it can play only when finalised.
Page 9
, we expect lots of other USB devices will work well with this product ) DSC (Digital Still Camera) ❋ Vendor Brand Samsung VP-MS11, S800, Pro815, V20, V10, D60, UCA5 Sony DSC-W50, DSC-R1, DSC-P200, DSC-P150 Olympus C-70 zoom, SP-700, FE5500, C-470Z...
contents geTTINg sTArTed Warning Precaution General Features Before reading the user’s manual How to use the HDD & DVD RECORDER Unpacking Description Tour of the Remote Control CONNeCTINg & seTTINg Up Connecting the HDD & DVD RECORDER Other type of connecting the Video output cable Other type of connecting the Audio output cable...
Page 11
reCOrdINg Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Copying from a Camcorder Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Go To Recorded List edITINg Basic Editing (Title List) Using the Sort function (Title List)
This HDD & DVD RECORDER supports 576P, 720P, 1080i and 1080P. anynet+(HDMi CEC) Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD RECORDER to a SAMSUNG TV using an HDMI Cable.
getting started HOW TO USE THE HDD & DVD rECOrDEr Step 1: Select the disc type or HDD Please check available disc type before recording. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc.
Page 15
Step 3 : recording There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as follows: Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc.
getting started UnPaCKing accessories Check for the supplied accessories below. PAUSE HDMI Cable Video/Audio Cable RF Cable for TV REPEAT Batteries for Remote Instruction Manual Quick Guide Remote Control Control (AAA Size) Preparing the remote Control install Batteries in the remote Control Open the battery cover on the back of the remote control.
getting started DESCriPTiOn Front Panel OPEN/CLOSE button Opens and closes the disc tray. DISPLAY Displays the playing status, time, etc. PLAY/PAUSE button Plays a disc or pauses playback. Goes to the next title/chapter/track or goes back to the previous title/chapter/track. (Playback mode) SEARCH/SKIP buttons Select TV preset Channels.
rear Panel The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product. In from aerial Connects RF cable from antenna. connector VIDEO OUT Connects the input of external equipment using a Video cable.
getting started Front Panel Display Playback-related, Lights when playback-related and open/close buttons are selected. Open/Close indicator In Disc Indicator Lights status icon. DVD VIEW Indicator Lights when DVD mode is selected. HDD VIEW Indicator Lights when HDD mode is selected. USB VIEW Indicator Lights when USB mode is selected.
TOUr OF THE rEMOTE COnTrOL Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands. Installing batteries in the remote Control lift the cover at the back of the remote Install two AAA size batteries.
Page 22
connecting & setting up COnnECTing THE HDD & DVD rECOrDEr Disconnect the aerial cable from your TV and connect it to In from aerial connector on the rear panel of the HDD & DVD RECORDER. Connect Out to TV connector of the HDD & DVD RECORDER and the aerial input of your TV using the supplied aerial cable.
OTHEr TYPE OF COnnECTing THE ViDEO OUTPUT CaBLE There are several ways to output video signal. Select one of the following video connecting that best suits you below. Case 1 : Connecting to a Video (Composite) output jack Case 2 : Component Video output jacks Component video and Progressive Output Modes Component video output is available only if your TV supports Component video input, respectively.
Page 24
connecting & setting up Case 2 : Component Video output jacks Connect Component video cables(not supplied) between the COMPONENT OUT(Y, P ) jacks on HDD & DVD RECORDER and COMPONENT IN(Y, P ) jacks on your TV. You will enjoy high quality and accurate colour reproduction images. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD &...
OTHEr TYPE OF COnnECTing THE aUDiO OUTPUT CaBLE There are several ways to connect your HDD & DVD RECORDER. Select the audio connection that best suits you below. Case 1 : Connecting to your TV Case 2 : Connecting to a stereo amplifier with AV output jacks Case 3 : Connecting to an AV amplifier with a digital output jack Manufactured under license under U.S.
Page 26
connecting & setting up Case 2 : Connecting to a stereo amplifier with aV output jacks If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks Front(L) Front(R) White speaker speaker Case 3: Connecting to an aV amplifier with a digital output jack If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection.
Page 27
COnnECTing HDMi/DVi TO a TV If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy the best quality images and sounds. Case 1 : Connecting to a TV with HDMI Jack Case 2 : Connecting to a TV with DVI Jack Case 1 : Connecting to a TV with HDMi Jack Using the HDMI cable connect the HDMI OUT jack on the rear of the HDD &...
Page 28
You can switch from the HDMI output to other output only in stop mode. If you use an HDMI cable to connect a Samsung TV to the HDD & DVD RECORDER, you can operate the recorder using the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).) (See page 37) Please check the ' logo (If your TV has an ' logo, then it supports Anynet+ function.)
COnnECTing TO aV 1 in, aV 2 in, DV inPUT JaCK This allows you to connect your HDD & DVD RECORDER to other external devices and view or record their outputs. Case 1 : Connecting a VCR, Set-Top Box(STB) or DVD player to the AV 1 IN jacks Case 2 : Connecting a Camcorder to the AV 2 IN jacks Case 3 : Connecting a Camcorder to the DV IN jack Case 1 : Connecting a VCr, Set- Top Box(STB) or DVD player to the aV 1 in jacks...
Page 30
connecting & setting up Case 2 : Connecting a Camcorder to the aV 2 in jacks You can also use the AV 2 IN jacks on the front panel of the HDD & DVD RECORDER.You can record from connected equipment, such as a camcorder. When an input source is inserted into AV 2 while viewing TV, the input will be switched to AV 2 automatically.
COnnECTing TO USB DEViCES This allows you to connect your HDD & DVD RECORDER to USB devices. Connecting a USB memory, MP3 player, Digital Camera to the USB HOST. MP3 Player Digital Camera Disconnecting the USB cable during the data transfer will stop the communication and may damage data stored in the memory.
system setup On-SCrEEn MEnU naVigaTiOn The on-screen menus allow you to enable or disable various functions on your HDD & DVD RECORDER. Press the MEnU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus.
Page 33
Auto channel scan will be started. The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found. auto channel scan completed successfully. Auto Channel Scan is completed. In 3~4 seconds, you will see Clock Setting Menu.
system setup SETTing THE CLOCK This menu is used to set the current time. You need to set the time to use timer recording. With the unit in Stop mode, press the MEnU button. HDD & DVD RECORDER Setup System Press the ▲▼...
Press the ▲▼ buttons to select auto Scanning, then press the OK or ▶ button. The message “Your data will be lost. Press [OK] to continue, [RETURN] to exit.” is displayed. Press the OK button. Channel scan will be started. The first frequency band is scanned and the first station found is displayed and stored.
system setup SETTing UP THE LangUagE OPTiOnS If you set the language options, in advance, they will come up automatically every time you watch a movie. With the unit in Stop mode, press the MEnU button. HDD & DVD RECORDER Language Press the ▲▼...
Page 37
Press the ▲▼ buttons to select On, then press the OK or ▶ button. For using anynet+ (HDMi CEC) Connect the HDD & DVD RECORDER to a Samsung TV with an HDMI cable. (See pages 27~28) Set the Anynet+ (HDMI CEC) to “On” on your HDD & DVD RECORDER. (see above) Set the Anynet+ function on your TV.
system setup DivX(r) registration Please use the Registration code to register this HDD & DVD HDD & DVD RECORDER System RECORDER with the DivX(R) Video On Demand format. For more Clock Set Library information, visit www.divx.com/vod DivX(R) Video On Demand Auto Power Off : Off Timer Record...
SETTing UP THE aUDiO OPTiOnS You can connect the HDD & DVD RECORDER to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. With the unit in Stop mode, press the MEnU button.
system setup This is only active when a Dolby Digital signal is detected. HDD & DVD RECORDER Audio On : When Movie soundtracks are played at low volume or from Digital Output : PCM Library smaller speakers, the system can apply appropriate compression to : Off Timer Record make low-level content more intelligible and prevent dramatic...
SETTing UP THE ViDEO OPTiOnS This function allows you to setup the video setting. This function depends on disc type. It may not work for some disc types. With the unit in Stop mode, press the MEnU button. HDD & DVD RECORDER Setup Press the ▲▼...
Page 42
BD Wise (Only Samsung products) BD Wise is Samsung’s latest inter-connectivity feature. HDD & DVD RECORDER Video When you connect Samsung products with BD-Wise to each other via TV Aspect : 16:9 Wide Library HDMI, the optimum resolution will be set automatically.
Page 43
The BD Wise menu item appears only if BD Wise is set to On. BD wise function is enabled only if BD Wise-compliant Samsung Products are connected with each other using the HDMI cable. Progressive scan automatically activates when HDMI is connected. (Please make sure HDMI is indicated on the front panel of the HDD &...
system setup SETTing UP THE ParEnTaL LOCK The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. With the unit in Stop mode, press the MEnU button.
SETTing UP THE rECOrDing OPTiOnS automatic Chapter Creator CVKL (V-mode) A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title. If you use this function, the Title will be divided into Chapters. Press the ▲▼ buttons to select Setup, then press the OK or ▶ HDD &...
Page 46
system setup EZ record CVKL (V-mode) This function allows you to Initialise and Finalise a disc automatically. HDD & DVD RECORDER Recording Press the ▲▼ buttons to select EZ record, then press the OK or Chapter Creator : Off Library ▶...
playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. rEgiOn CODE (DVD-ViDEO OnLY) Both the HDD & DVD RECORDER and the discs are coded by : Israel region. These regional codes must match in order for the disc to play.
Page 48
playback Disc Logo Recorded Disc Types Disc Shape Max. Playing Time content content 1 hr. (XP: Excellent Quality) 2 hrs. (SP: Standard Quality) Single Layer(12cm) (4.7GB) 4 hrs. (LP: Long Playback) AUDIO 6 or 8 hrs. (EP: Extended) DVD-RAM VIDEO 2 hr.
Discs that cannot be played DVD-Video with a region number other than : - “2” or “ALL” : Israel - “3” or “ALL” : Indonesia, Singapore, Malaysia, Vietnam - “5” or “ALL” : India 3.9 GB DVD-R Disc for Authoring. DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder.
playback USing THE DiSC MEnU & TiTLE MEnU Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter, audio track, subtitle, film preview, information on characters, etc. For DVD-ViDEO Disc Disc Menu : Press the DiSC MEnU button to enter the disc menu of the disc. Move to the setup menu related to playback operation.
Skipping Chapters, Titles or Markers SZXCVBKL During play, press the SKiP ( ) buttons on the remote control. if you press the SKiP ( ) button, it moves to the beginning of the chapter or Title or marker (HDD/DVD-RAM/-RW(VR mode)). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or Title or marker (HDD/DVD-RAM/-RW(VR mode)).
playback USing THE inFO BUTTOn The INFO function allows you to easily search for a desired scene by accessing title, chapter, or time. You can also change the subtitle and audio settings and set some features including Angle, Repeat, and Zoom. Moving to a scene directly using the inFO SZXCVKLD If you want to move to a certain title, chapter or time, use this function.
SELECTing THE SOUnDTraCKS & aUDiO CHannELS SZXCKLD Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the aUDiO button on the remote control. Press the inFO button during playback.
playback repeat a-B SZXCVKL Press the inFO button during playback. Repeat > Press the ▲▼ buttons to select repeat. Press the ◀▶ buttons to select a-B, then press the OK button. Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B).
USing MarKErS (VR mode) Set marks at scenes you want to see again so that you can start playback from the marked position. Setting Markers Press the MarKEr button during playback. Marker 01 02 -- -- -- -- -- -- -- -- Press the OK button when the desired scene appears.
playback USing THE BOOKMarKS ZCVKL (V mode) Setting Bookmarks Press the MarKEr button during playback. Bookmark Press the OK button when the desired scene appears. The number 1 is displayed and the scene is memorized. Press the ▶ button to move to the next position. Press the OK button again when the desired scene appears.
PLaYing an aUDiO CD/MP3 Buttons on the remote Control used for audio CD(CD-Da)/MP3 playback SKIP ( ) button : Moves to the previous or next page. PAUSE Press the SEARCH ( ) buttons : Fast Play (X 2, X 4, X 8) (Audio CD only) STOP ( ) button : Stops a track(song).
playback Playing an MP3 Disc Insert an MP3 disc into the disc tray. The menu is displayed Press the ▲▼ buttons to select Library, then press the OK or + button. Press the ▲▼ buttons to select Music, then press the OK or + button. Press the ▲▼...
Page 59
CD import Press the rED(a) button during the Music List playback. Music List Press the ▲▼ buttons to select CD import, then press the OK or Q TRACK01 1/10 Title Length + button. Q TRACK01 4:19 002 TRACK02 3:57 Press the ▲▼ buttons to select file you want to copy, then press 003 TRACK03 3:57 CD Import...
Page 60
playback go To Playlist Press the rED(a) button during the Music List playback. Playlist � � Press the ▲▼ buttons to select go To Playlist, then press the OK Title Length or ▶ button. Y PLAYLIST E PLAYLIST01 Press the ▲▼ buttons to select the desired playlist folder, then ( @ ▶ # ) 00:02:22 press the OK button.
Page 61
go To Music List Press the BLUE(D) button during the Playlist playback. Playlist The Music List will be displayed. Q TRACK04 � Title Length PLAYLIST01 TRACK04 4:03 TRACK02 3:57 ( @ ▶ # ) 00:02:22 TRACK06 5:08 � TRACK04 TRACK01 4:19 � PLAYLIST01 Edit Playlist New Playlist Music List EXIT...
playback ViEWing a PiCTUrE Insert a JPEG disc into the disc tray. Photo List The menu is displayed Image 1.jpg 1/17 Press the ▲▼ buttons to select Library, then press the OK or ▶ button. ROOT Image 1.jpg Image 10.jpg Image 11.jpg Press the ▲▼ buttons to select Photo, then press the OK or ▶ button.
Zoom To setup, follow steps 1 to 4 in page 62. . Press the YELLOW(C) button to select Zoom. Each time the OK button is pressed, the picture is enlarged up to 4x (four times the normal size). ➞ X2 ➞ X4 ➞ X2 ➞ normal You can go to Photo List by pressing YELLOW(C) button.
playback PLaYing a DiVX Using the MEnU button Insert a DivX disc into the disc tray. DivX List The menu is displayed Movie_01.avi Title Size Press the ▲▼ buttons to select Library, then press the OK or ▶ Y ROOT 001 Movie_01.avi 162.8MB button.
Page 65
Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Western Icelandic, Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Central Slovenian Greek English, Greek English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Cyrillic Uzbek If the subtitle language is displayed in broken fonts, change DivX Subtitle to the appropriate region.
This HDD & DVD RECORDER can record on the following discs. DVD-RAM DVD-RW DVD-R DVD+RW DVD+R DVD-RAMs and DVD±RWs are rewritable. DVD±Rs are non-rewritable. Compatibility between Samsung and Other Company’s recorder Recording Additional Recording in Disc Types Recording Device Finalising format Samsung Recorder...
Finalise - This closes the DVD-RW/±R so no additional recording can be done. Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD RECORDER. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised.
In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use this mode for timer recording. DVD-HR773 Recording Times Recording Mode HDD (160GB) DVD-RAM/±RW/±R...
recording rECOrDing iMMEDiaTELY SXCVKL Before you start Check that the disc has enough available space for the recording. Press the HDD or DVD button. If you select DVD, Press the OPEn/CLOSE button and place a recordable disc on the disc tray. Press the OPEn/CLOSE button to close the disc tray.
To pause recording Press the rEC PaUSE button to pause a recording in progress. Press the rEC PaUSE button again during pause to resume recording. You can switch channels by pressing the PrOg ( ) buttons while recording pauses. If you select DV mode during rec pause, recording will be stopped. If you change the input source during rec pause in DV mode , recording will be stopped.
recording To stop recording Press the STOP ( ) button to stop or finish a recording in progress. When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a moment” is displayed. To display playback related icons on the screen, press any direction button on the remote control. MaKing a OnE TOUCH rECOrDing (OTr) SXCVKL You can set the HDD &...
SiMULTanEOUS rECOrDing anD PLaYBaCK You can play back from the beginning of the programme you are currently recording. You can watch the previous title list while recording a programme. Using the PLaY ( ) button With the unit in recording mode, press the PLaY ( ) button.
recording TiME SHiFT FUnCTiOn aS a LiVE SignaL This function replays recordings as a live signal. If you are interrupted while watching a TV programme, simply press the TiME Time Shift SHiFT button, and the HDD & DVD RECORDER immediately starts recording the programme.
MaKing a TiMEr rECOrDing SXCVKL Check if the antenna cable is connected. Check the remaining time of the disc. Check if the date and time are correct. Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer HDD &...
recording TiTLE : To label the title name, press the rED(a) button. Title renaming screen appears. Follow steps 4 and 5 of “Renaming (Labelling) a Title” on pages 79~80. After selecting the set up value for each mode, press the OK button to select Save. ’...
Press the OK button to confirm the added setting. Press the EXiT ( ) button after finishing the operation. The Scheduled List screen will disappear. Deleting a Scheduled List SXCVKL Follow these directions to delete an entry from the Scheduled List. To setup, follow steps 1 to 2 in “Making a Timer Recording”...
Page 78
information about recorded List Informs whether the selected Recorded List performed a Timer Recorded List Recording successfully. Source Date Start Mode Status HDD Pr 01 Jan 01 17:30 18:30 HDD Pr 01 Jan 01 21:00 22:00 . Press the ▲▼ buttons to select the number of the recorded List, HDD Pr 01 Jan 01 23:15...
editing This section introduces basic functions of editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Recording or editing might not be completed if an error, such as a sudden power failure occurs.
Page 80
editing Press the BLUE(D) button to select Save. Rename The changed title name is displayed on the title item of the selected S por ts(A1) entry. Back Space Space Clear Save MOVE SELECT RETURN EXIT Locking (Protecting) a Title SXCVKL Follow these instructions to lock an entry to protect it from accidental editing.
Deleting a Title SXCVKL Follow these instructions to delete an entry from the Title List. Using the TiTLE LiST button With the unit in Stop mode/Playback mode, press the TiTLE LiST Title List button. JAN/02/2009 21:00 PR1 Title Length Press the ▲▼ buttons to select an entry you want to delete in the 001 JAN/01/2009 17:30 PR 01:00:00 Delete...
Page 82
editing Splitting a Section of a Title (Split) Follow these instructions to split a section of a Title List entry into two titles. Using the TiTLE LiST button With the unit in Stop mode/Playback mode, press the TiTLE LiST Title List button.
Press the OK button at the starting point. Partial Delete The image and starting point time is displayed in the section JAN/01/2009 17:30 PR1 Title List No. 001 deletion starting point window. Start Select the start and end points of the section you want to delete using the playback related buttons.
editing naVigaTiOn MEnU Time navigation (VR mode) Using this function, you can search scene minute-by-minute from the recorded title list. Using the TiTLE LiST button With the unit in Stop mode/Playback mode, press the TiTLE LiST Title List button. JAN/01/2009 17:30 PR1 Title Length Press the ▲▼...
SELECT COnTEnTS SXCVKL Press the BLUE(D) button to select Contents. Title List Press the ▲▼ buttons to select the contents you want to move, JAN/01/2009 17:30 PR1 Title Length then Press the OK or ▶ button. 001 JAN/01/2009 17:30 PR 01:00:00 002 JAN/02/2009 21:00 PR 01:00:00...
editing Playing Entries in the Playlist (VR mode) Follow these instructions to play the playlist entries. Using the PLaY LiST button With the unit in Stop mode/Playback mode, press the PLaY LiST Playlist button. JAN/02/2009 13:47 Title Length Press the ▲▼ buttons to select the playlist you want to play, then 001 JAN/02/2009 13:47 00:06:09 002 JAN/02/2009 13:51...
Editing a Scene for the Playlist (VR mode) Follow these instructions to edit scenes for a playlist. Using the PLaY LiST button With the unit in Stop mode/Playback mode, press the PLaY LiST Playlist JAN/02/2009 13:47 button. Title Length 001 JAN/02/2009 13:47 00:06:09 Press the ▲▼...
editing Moving a Scene (Changing the Position of a Scene) To setup, follow steps 1 to 3 on page 87. . Press the ▲▼◀▶ buttons to select the scene you want to move Edit Playlist (change the position), then press the grEEn(B) button. JAN/02/2009 13:47 Scene No.
Deleting a Playlist Entry from the Playlist Using the PLaY LiST button With the unit in Stop mode/Playback mode, press the PLaY LiST Playlist button. JAN/02/2009 13:47 Title Length Press the ▲▼ buttons to select an entry you want to delete in the 001 JAN/02/2009 13:47 00:06:09 002 JAN/02/2009 13:51...
editing COPYing FrOM HDD TO DVD Or ViCE-VErSa about the Copy Screen Total size and number of selected titles for copying Copy Selected Items: Available : 4099MB Title to be copied Source : HDD To : DVD 001 JAN/01/2009 1 ; DVD 002 JAN/01/2009 1 This shows available disc space...
Press the rED(a) button to select Start Copy. The title to be copied is not displayed on the screen, and copying begins while the currently broadcasting programme is displayed on the screen. Press the inFO button to view the copy processing bar. If you press inFO button again, copy processing bar will disappear.
editing Press the ▲▼ buttons to select the MP3, Photo or DivX file you Copy want to copy, then press the MarKEr button until a checkmark Selected Items: 9.68MB (2) Available : 236724MB Source : DVD To : HDD appears. Y ROOT ROOT If you don’t want to copy a certain one of the checked entries,...
Pressing the EXIT ( ) button during folder copying will cancel the Copy folder copying after the current file is copied. Selected Items: 76.8MB (2) Available : 236715MB Source : DVD Copying... To : You can copy up to 500 files or 500 sub folders to one folder. Free space : 236615 MB Y ROOT ROOT...
editing DiSC ManagEr Editing the Disc name XCVKL Follow these instructions to give a name to a disc. With the unit in Stop mode, press the MEnU button. DVD-RAM(VR) Disc Manager Press the ▲▼ buttons to select Disc Manager, then press the OK Disc Name DVD-VR Used Space...
Delete all Title Lists XCVKL With the unit in Stop mode, press the MEnU button. DVD-RAM(VR) Disc Manager Press the ▲▼ buttons to select Disc Manager, then press the OK Disc Name DVD-VR or ▶ button. Used Space 00:17 ( 0.52 GB) Available Space 01:54 SP ( 3.85 GB)
editing Formatting a Disc SXCK Use these instructions to format a disc. The disc protect should also be cleared. With the unit in Stop mode, press the MEnU button. Disc Manager Press the ▲▼ buttons to select Disc Manager, then press the OK Used Space 000:39 ( 1.68 GB)
Page 97
Once a disc is finalised, you cannot delete entries from the record list. After being finalised, the DVD±R/-RW(video mode) operates in the same manner as a DVD-Video. Depending on the disc type, the displayed screen may be different. Finalising time may be different depending on the amount of data recorded on the disc. Data on the disc will be damaged if the recorder is powered off during finalisation process.
TrOUBLESHOOTing If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. PROBLEM EXPLANATION/SOLUTION The input is displayed for a while when The HDD & DVD RECORDER requires some time to initialize and the input will be the power is turned on.
Page 99
Read the table of contents and then find and read the section describing your problem, follow the instructions given. • Plug your HDD & DVD RECORDER off and on. • If the problem still persists, contact a nearby Samsung service centre. English _...
Recording XP (about 8,5 Mbps), SP (about 4,5 Mbps), LP (about 2,5 Mbps), Recording Quality EP (about 1,6 Mbps or about 1,2 Mbps) Audio Frequency Response 20 Hz~20 kHz DVD-HR773 160 GB HDD Capacity DVD-HR775 250 GB DVD-HR777 320 GB USB 2.0 H/S...
Page 101
This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com. GPL software: Linux Kernel, Busybox, Binutilis LGPL software: Glibc...
Page 102
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
Page 103
Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
Page 104
.GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
Page 105
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/ or translated straightforwardly into another language.
Page 106
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
Page 107
License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;...
Page 108
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region Country Contact Center Web Site CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca North America MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/mx U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us...
Need help?
Do you have a question about the DVD-HR773 and is the answer not in the manual?
Questions and answers