Related Manuals for Mitsubishi Electric MDT65IS
Summary of Contents for Mitsubishi Electric MDT65IS
- Page 1 64.5" LCD Display Monitor MODEL Before use - Please be sure to read the “Safety Precautions.” They are important to use this LCD display monitor.
- Page 3 English...
-
Page 5: Table Of Contents
Index Features ....................................English-2 Important Information ................................English-3 Declaration ....................................English-5 Safety Precautions, Maintenance & Recommended Use ....................... English-6 Contents ....................................English-7 Parts Name and Functions ............................... English-8 Buttons, Switch, and Indicator ..........................English-8 Connectors and Terminals ............................English-9 Wireless Remote Control ............................English-10 How to Use the Wireless Remote Control ........................ -
Page 6: Features
Features Engineered Specially for Public Display Use with High Variable Management Functions Supporting Effi cient Durability and High-level Specifi cations Operation and Management Panel Designed for Heavy Use Page 56 Programmable Scheduling Function Page 34 and 48 Highly durable LCD panel for commercial use. The monitor’s operating schedule can be programmed for Able to keep displaying crisp, vivid images and endures harsh up to seven different scheduled time intervals by time, day... -
Page 7: Important Information
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc. Address: 9351 Jeronimo Road, Irvine, California 92618 U.S.A. - Page 8 Important Information (continued) WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
-
Page 9: Declaration
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. -
Page 10: Safety Precautions, Maintenance & Recommended Use
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE • Handle with care when transporting. Save packaging for THE FOLLOWING WHEN SETTING UP AND USING transporting. THE LCD COLOR MONITOR: • Please clean the holes of back cabinet to reject dirt and dust at least once a year because of set reliability. -
Page 11: Contents
Contents Your LCD monitor (MDT651S) comes with the following: 64.5" LCD Display Monitor MODEL Before use - Please be sure to read the “Safety Precautions.” They are important to use this LCD display monitor. - Please check the content of the package. This document contains instructions for World Wide model and Japan model, but their accessories are different. -
Page 12: Parts Name And Functions
Parts Name and Functions Buttons, Switch, and Indicator Front Rear Control buttons Main Power Switch INPUT button Switches the main power on/off. Displays the OSD menu to switch the video input. You can select [RGB1], [RGB2], [RGB3], [RGB4], [RGB5], [RGB6], Remote control sensor and Power indicator [DVD/HD], [VIDEO<S>], or [VIDEO] using the UP ( ) or DOWN... -
Page 13: Connectors And Terminals
Parts Name and Functions (continued) Connectors and Terminals Anti-theft lock slot You can insert a Kensington anti-theft lock key. Cr/Pr Cb/Pb Main Power Switch AC IN (3-pin, with earth terminal) RGB6 IN (DisplayPort) Connects with the supplied power cord. Connects with the digital video output of a computer, etc. EXTERNAL SPEAKER TERMINAL RGB1 IN (HDMI) Connects with the special stereo speakers (option). -
Page 14: Wireless Remote Control
Parts Name and Functions (continued) Wireless Remote Control AUDIO INPUT buttons Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3], and [HDMI]. However, note that [VIDEO<S>] and [VIDEO] use common settings. You can select [HDMI] only when the video input source is [RGB1]. PIP (Picture-in-Picture) buttons ON/OFF button: Switches the PIP or POP mode on/off. -
Page 15: How To Use The Wireless Remote Control
Parts Name and Functions (continued) How to Use the Wireless Remote Control Operating Range of the Wireless Remote Installing and removing t he Wireless Control remote control batteries Point the wireless remote control toward the LCD monitor’s The wireless remote control is powered by 1.5 V AAA batteries. remote control sensor during button operation. -
Page 16: Cat5 Tx Box
Parts Name and Functions (continued) CAT5 Tx BOX Front Rear USB (B type) Auxiliary power supply input connector (DC IN Connector for receiving the power supplied from the USB 5 V) device such as the computer. By connecting a USB cable, you Though the power is supplied from the above-mentioned can control the CAT5 Tx BOX using the control commands USB connector, an auxiliary DC power adapter (commercially... -
Page 17: Preparation For Use
Preparation for use Flow of preparation Preparation for installation Page 14 - Determine the installation location - Ventilation requirements for enclosure mounting Carry out as necessary Installing the monitor Pages 15 to 16 - Using the wall mount or ceiling mount - Using the monitor without the bezel - Installing in the portrait position Carry out as necessary... -
Page 18: [P-1] Preparation For Installation
Preparation for installation Install the monitor on a wall or ceiling strong enough to Ventilation requirements for enclosure mounting support its weight where the screen is easy to view, using commercially available wall or ceiling mount brackets. To allow heat to disperse, leave space around the monitor as shown in the fi... -
Page 19: [P-2] Installing The Monitor
Use M8 screws (having a length 15 mm longer than the thickness of the mounting bracket) and tighten them securely. Prevent the screws from loosening using spring washers, etc. MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America. -
Page 20: Installing In The Portrait Position
Installing the monitor (continued) Carry out as necessary Installing in the portrait position Conditions: MDT651S can be installed in the portrait position, under the following conditions: CAUTION: Portrait position is available only when the monitor is wall- mounted or ceiling-mounted. Operation Environment (Temperature) shall be limited, as shown below: Operation Environment:... -
Page 21: [P-3] Installing The Optional Speakers
Installing the optional speakers Carry out as necessary Before connecting the signal cable to PC and Video • Optional speakers can be installed. • Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure. How to install the optional speakers 1. -
Page 22: [P-4] Connection Procedure
Connection procedure Before making connections • First turn off the power of all the connected equipment before making connections. • Refer to the user manual of each piece of equipment. NOTE: Please use the audio cable without resistance when the audio output terminal of the audio device and PC is stereo mini-Jack. When the audio cable with resistance is used, the audio level may not be increased or no audio may be output. -
Page 23: Connecting With A Computer (Analog Connection)
Connection procedure (continued) Connecting with a computer (analog connection) Analog connection: • Connection via RGB3 IN (D-SUB) connector (1) Connect a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the RGB3 IN connector. (2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control. •... -
Page 24: Connecting With A Computer (Digital Connection)
Connection procedure (continued) The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other device is connected, it automatically displays images properly. See the page describing AUTO SETUP/AUTO ADJUST. <Factory preset timing> Frequency Frequency Resolution... -
Page 25: Connecting A Video Device (Component Video/Hdmi Device)
Connection procedure (continued) Connecting a video device (component video/HDMI device) This monitor can be connected to a video device equipped with component output such as a DVD player. Refer to the user’s manual of the connected device for details. (Cables shown in the fi gure below are commercially available.) •... -
Page 26: Connecting A Video Device (Composite Video/S Video Device)/Stereo Amplifi Er
Connection procedure (continued) Connecting a video device (composite video/S video device)/stereo amplifi er This monitor can be connected to a stereo amplifi er. Refer to the user’s manual of the stereo amplifi er for details. (Cables shown in the fi gure below are commercially available.) •... -
Page 27: [P-5] Connecting Cat5
Prolifi c Technology Inc. Prolifi c 1. In addition to the connection described in 2-1), connect the Technology Inc. and Mitsubishi don’t assume any responsibility OUT connector of the RGB5/CAT5 input/output connector or liability for any damages incurred by the user. -
Page 28: Video Connection
Connecting CAT5 (continued) Carry out as necessary Allowable cable length Connection Max. cable length/signal timing One monitor 150 m / 1920 x 1080 @60 Hz 200 m / 1920 x 1080 @60 Hz Multiple monitors (Total length of the connected cables) The lengths given above are based on the actual measurements using our standard signal source and the recommended cable as follows. -
Page 29: [P-6] Connecting Rs-232C
Connecting RS-232C Carry out as necessary Monitor control via RS-232C By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available) or CAT5 cables (commercially available), you can control the monitors from the computer via the supplied CAT5 Tx BOX for the following operations: •... -
Page 30: [P-7] Connecting Lan
Connecting LAN Carry out as necessary Monitor connection using LAN By connecting the monitor and the computer using a LAN cable (commercially available), you can control the following functions from the computer. • Power ON or OFF • Switching between input signals Rear of LCD monitor (fi... -
Page 31: [P-8] Connecting The Power Cord To The Monitor
Connecting the power cord to the monitor Connecting the power source • The power outlet socket should be installed as near the equipment as possible and should be easily accessible. • Fully insert the prongs into the power outlet socket. Loose connection may cause noise. -
Page 32: Flow Of How To Using
How to Use Flow of How to Using Turning on all the connected devices Page 29 Selecting the video input Page 30 Controlling the external devices Page 31 Selecting the OSD language Page 31 RGB3, RGB4, and RGB5 only Auto-setup Page 32 Selecting the picture mode Page 32... -
Page 33: [U-1] Turning On All The Connected Devices
Turning on all the connected devices Power Indicator Turning on external devices Status Power ON Green 1. Turn on the connected devices such as Power OFF the computer and VCR. Power Standby when Red On Before turning on the monitor, turn on the computer. “SCHEDULE”... -
Page 34: [U-2] Selecting The Video Input
Selecting the video input You can select the desired video input using the wireless remote control or the INPUT button on the monitor. „ Select using the INPUT buttons on the wireless remote control. You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control. Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6] (DISPLAY PORT), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO]. -
Page 35: [U-3] Controlling The External Devices
Controlling the external devices You can control the externally connected devices to display images supplied from them. VCR, etc. Personal computer Selecting the OSD language Select the OSD language using LANGUAGE in the CONFIGURATION1 menu of the OSD screen function. See page 46. English-31... -
Page 36: [U-5] Auto-Setup
Auto-setup Analog inputs only The AUTO SETUP button on the wireless remote control or AUTO SETUP in the OSD menu automatically adjusts the screen size, horizontal/vertical position, clock, clock phase, white level, and black level. NOTE: The auto setup works on RGB3, RGB4, and RGB5 only. Selecting the picture mode Using the PICTURE MODE button on the wireless remote control, you can select the picture mode suitable for images to be displayed. -
Page 37: [U-7] Screen Adjustment
Screen adjustment When images aren’t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU button on the wireless remote control or the control buttons on the rear of the monitor to display the OSD menu. Using the SCREEN settings in the OSD menu, you can adjust the horizontal/vertical position, clock, clock phase, zoom mode, CUSTOM ZOOM, horizontal resolution, and vertical resolution. -
Page 38: [U-9] Volume Control
Volume control Carry out as necessary When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless remote control. In addition, you can adjust the volume by pressing the MENU button on the wireless remote control or the control buttons on the rear of the monitor to display the OSD menu. -
Page 39: How To Set Up Schedule
U-10 Schedule setting (continued) Carry out as necessary How to set up schedule Check box Radio button When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP ) or DOWN ( ) button moves the cursor vertically and pressing the PLUS (+) or MINUS (-) buttons moves it horizontally. -
Page 40: [U-11] Remote Control
U-11 Remote control Carry out as necessary RS-232C/RS-485 Remote control By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available) or CAT5 cables (commercially available), you can control the monitors from the computer via the supplied CAT5 Tx BOX for the following operations: •... - Page 41 U-11 Remote control (continued) Carry out as necessary 2) Control command diagram The command is structured by the address code, function code, data code and end code. The length of the command is different for each function. NOTE: This example shows a basic command that is used when a single computer and a single monitor are connected. When you want to connect multiple monitors or perform complicated control using other commands than the basic commands, contact your dealer for advanced command specifi...
-
Page 42: Lan Remote Control
U-11 Remote control (continued) Carry out as necessary 5) Read command The computer sends the command without datacode to the monitor. After receiving this command, the monitor returns the command with datacode including the current status to the computer. Example: When the computer asks the power status of the monitor, and the status of the monitor is powered-on. Command from computer Command from monitor Detail of command... -
Page 43: Confi Guration And Basic Operation Of Osd Screen
Confi guration and basic operation of OSD screen Confi guration of OSD screen This monitor is equipped with the OSD (On Screen Display) function for easy screen adjustment. The OSD function allows you to control the menus displayed on the screen for brightness setting and other settings. The OSD screen is confi... -
Page 44: Basic Operation Of Osd
Confi guration and basic operation of OSD screen (continued) Basic operation of OSD When the MENU button on the wireless remote control or the EXIT button on the monitor is pressed, the OSD screen is displayed. Select a main menu by pressing the button. -
Page 45: Osd Screen Functions
OSD screen functions PICTURE „ BRIGHTNESS MAGENTA You can adjust the brightness. Press the PLUS (+) button to increase the brightness. Press the MINUS (-) button to decrease the brightness. „ CONTRAST YELLOW BLUE You can adjust the contrast. Adjust the contrast using the PLUS (+) or MINUS (-) button to obtain a desired result. - Page 46 OSD screen functions (continued) „ AUTO BRIGHTNESS This function controls the screen brightness depending on the ambient light for easy viewing. In addition, it changes the screen brightness depending on the ambient light and what are displayed on the screen to reduce power consumption as low as possible.
- Page 47 OSD screen functions (continued) SCREEN „ „ H POSITION CUSTOM ZOOM You can adjust the horizontal image position. CUSTOM ZOOM becomes selectable when you set ZOOM Press the PLUS (+) button to move the image to the right. MODE to CUSTOM. Press the MINUS (-) button to move the image to the left.
- Page 48 OSD screen functions (continued) AUDIO „ BALANCE You can adjust the balance of the right and left volumes. Press the PLUS (+) button to decrease the left volume. Press the MINUS (-) button to decrease the right volume. „ TREBLE You can adjust the high frequency sound.
- Page 49 OSD screen functions (continued) PIP (PICTURE IN PICTURE) NOTE: The PIP and POP functions don’t work in the CUSTOM and REAL picture size modes. Refer to “PIP, POP function” for details. (See page 53.) „ „ PIP MODE PIP RESET You can select the PIP mode from PIP, POP, SBS ASPECT, You can reset all the PIP settings to the factory defaults.
- Page 50 OSD screen functions (continued) CONFIGURATION1 „ AUTO SETUP Move Enlarged * For the RGB3 and RGB4 inputs only. Press the SET button to automatically adjust the screen size, horizontal position, vertical position, clock, clock The portion (shaded part) outside the phase, white level, and black level.
- Page 51 OSD screen functions (continued) CONFIGURATION2 „ „ CAT5 CONTROL MONITOR ID ID numbers for wireless remote control are assigned to [CAT5 CABLE LENGTH] MDT651S monitors that are multi-connected via RS-232C. Select the cable length, and the defaults of all the ID numbers 1 to 26 are selectable.
- Page 52 OSD screen functions (continued) „ SCHEDULE You can program the LCD monitor operation schedules. (See page 35.) < HOW TO SETUP SCHEDULE > Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.
-
Page 53: Advanced Option
OSD screen functions (continued) ADVANCED OPTION „ „ INPUT RESOLUTION IR CONTROL * For the RGB3 and RGB4 inputs only. You can lock the wireless remote control. Select from the following two modes using the You can select the following resolutions according to buttons and then determine the selected mode by pressing the input signal: AUTO, 1024x768, 1280x768, 1360x768, the SET button. - Page 54 OSD screen functions (continued) „ HEAT STATUS The statuses of the cooling fan, brightness, and internal temperature are displayed. NOTE: The cooling fan starts running according to the operating temperature or when COOLING FAN is ON in the SCREEN SAVER menu. When the operating temperature substantially exceeds the operation guaranteed range, the message “TEMPERATURE WARNING!!”...
-
Page 55: Other Functions
Other functions Picture size Audio input change RGB1, 2, 3, 4, 5, 6 RGB1 FULL NORMAL CUSTOM REAL HDMI AUDIO1 AUDIO2 AUDIO3 DVD/HD Other inputs FULL NORMAL DYNAMIC CUSTOM REAL AUDIO1 AUDIO2 AUDIO3 VIDEO, VIDEO<S> FULL NORMAL DYNAMIC CUSTOM REAL OSD information NORMAL RGB1, 2, 3, 4, 5, 6... -
Page 56: Supplemental Information Of The Auto Brightness Function
Other functions (continued) Supplemental information of the auto brightness function To control multiple monitors collectively In such a case where the tiling function is used, you can control the auto brightness function by sharing the detection result of the brightness sensor of a certain monitor among the connected monitors. 1. -
Page 57: Pip, Pop Function
Other functions (continued) PIP, POP function The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes do not function when the screen size is “CUSTOM” or “REAL”. Sub screen RGB6 RGB1 RGB2 RGB3... -
Page 58: Remote Control Numbering Function
Other functions (continued) Remote control numbering function By connecting multiple MDT651S monitors using RS-232C cables, you can control any one monitor or all the monitors by one remote controller. 1. Assign arbitrary ID number to each of multi-connected MDT651S monitors using MONITOR ID. ID numbers 1 to 26 are selectable. -
Page 59: Troubleshooting
NOTE: As with all display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. -
Page 60: Specifi Cations
Specifi cations Orientation Landscape / Portrait 1498 1436 Dimension (Unit: mm) Screen size (diagonal) 65” (1639 mm) Panel Type Panel Pitch 0.744 mm Resolution 1920 x 1080 pixels (Full HD) LCD Module Color Approximately 1.06 Billion Brightness (typ.) 700 cd/m Contrast ratio 2500 : 1 >... -
Page 61: Pin Assignment
Pin Assignment 1) Analog RGB input (Mini D-SUB 15-pin): RGB3 Pin No Name Pin No Name Mini D-SUB 15-pin Video Signal Red +5V (DDC) Video Signal Green SYNC-GND Video Signal Blue DDC-SDA DDC-GND H-SYNC Red-GND V-SYNC Green-GND DDC-SCL Blue-GND 2) Analog RGB input (CAT5): RGB5 Pin# at RJ45 Signal Pair... - Page 62 Pin Assignment (continued) 5) Digital RGB input (DISPLAY PORT): RGB6 Pin No Name Pin No Name DISPLAY PORT ML_Lane 3 (n) GND Top ML_Lane 0 (p) ML_Lane 3 (p) CONFIG1 ML_Lane 2 (n) CONFIG2 AUX CH (p) ML_Lane 2 (p) ML_Lane 1 (n) AUX CH (n) Hot Plug Detect...