Setting Up A Repeater Unit - NETGEAR WNR2200 User Manual

Setting Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note: If you are using the WNR2200 base station with a non-NETGEAR wireless router
as the repeater, you might need to change additional configuration settings. In
particular, you should disable the DHCP server function on the wireless
repeater AP.
To configure a WNR2200 router as a repeater unit:
1. Log in to the router that will be the repeater. Check the Wireless Settings screen, and verify
that the wireless settings match the base unit exactly. The wireless security option must be set
to WEP or None.
2. In the Wireless Repeating Function screen (depending on the frequency you want to use),
select the Enable Wireless Repeating Function check box and the Wireless Repeater radio
button.
3. Fill in the Repeater IP Address field. This IP address must be in the same subnet as the base
station, but different from the LAN IP of the base station
4. Click Apply to save your changes.
5. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the wireless router should be able to
connect to the Internet or share files and printers with any other wireless or wired computer or
server connected to the other AP.
Customizing Your Network Settings
N300 Wireless Router with USB WNR2200 User Manual
v1.0, May 2011
6-25