Setting Up A Repeater Unit - NETGEAR Wireless-N User Manual

To set up the base station:
1. Set up both units with exactly the same wireless settings (SSID, mode, channel, and security).
Note that the wireless security option must be set to None or WEP.
2. Log into the modem router base unit, under the Advanced heading, select Wireless Repeating
Function to display the Wireless Repeating Function screen.
Figure 6-14
3. Select the Enable Wireless Repeating Function check box and the Wireless Base Station
radio button.
4. Enter the MAC address for the repeater units.
5. Click Apply to save your changes.

Setting Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note: If you are using the DGND3300 base station with a non-NETGEAR modem router
as the repeater, you might need to change additional configuration settings. In
particular, you should disable the DHCP server function on the wireless
repeater AP.
Customizing Your Network Settings
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
v1.0, January 2010
6-22