As8; Compo; Ascii Position Output - Motorola M12 Oncore User Manual

ASCII Position Output

as8

Combined Position

compo

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function The ASCII position output message has a comma separated\
format with values and units similar to NMEA messages. This
command controls the output of the ASCII Position Message.
Syntax as8 ([ 0 .. 255 ])
Example as8 1<ENTER>
Notes This message provides position, velocity, time, and receiver
status. The record command can be used to record output files
of this format with the .as8 extension by entering record as8.
Press Shift-F5 to view the output from this message.
See Also None
Binary Equivalent @@Eq
Function Sets the initial latitude, longitude and height coordinates of the
12 Channel Oncore receiver
Syntax compo (lat lon hgt g)
lat
lon
hgt
g
Example compo 33 24 49.417 –111 58 34.824 364.7 g<ENTER>
Notes If the receiver is computing a 2D or 3D fix, the receiver ignores
the changed latitude and longitude and responds with the
current latitude and longitude. If the receiver is computing a
3D fix, the receiver ignores the change height and responds with
the current height.
See Also None
Binary Equivalent @@Ga
0 = outputs message one time only
1 .. 255 = outputs message at specified update
interval (seconds)
(-)dd mm ss.sss
(-)ddd mm ss.sss
(-)hhhhh.hh
GPS height
121