Almout; Ephin - Motorola M12 Oncore User Manual

Almanac Data Output

almout

Ephemeris Data Input

ephin

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function Outputs current almanac data contained within the Oncore
receiver.
Syntax almout ([0 | 1])
0
1
Example almout 0<ENTER>
Notes The Oncore receiver outputs the almanac as thirty-four 33-byte
messages. Running the command record alm prior to the Almanac
Data Output command stores data in Motorola binary format in a
file with extension ".alm". Use the run command to input the
stored almanac data to a receiver. Press F4 to view the Almanac
data screen.
See Also Input Almanac Data Input (@@Cb)
Record GPS Data (record)
Binary Equivalent @@Be
Function Used to input ephemeris data one satellite at a time. The entire
ephemeris data set is input by using the run command.
Syntax ephin svid byte1 byte2..byte73
Example ephin 3<ENTER>
Notes Use the run command with a filename with the .eph extension to
input the entire latest ephemeris data set in one step.
See Also None
Binary Equivalent @@Bf
= outputs almanac once
= outputs almanac upon change
117