Description; Dns Primary - HP 530 Management Manual

Command Usage
This command allows you to disable the Ethernet interface due to
abnormal behavior (e.g., excessive collisions), and re-enable it after the
problem has been resolved. You may also want to disable the Ethernet
interface for security reasons.
Example:
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# disable
Connection to the host is lost.

description

This command specifies a human-readable string description of this interface.
Syntax
description <string>
string - The alphabetical description of the interface.
•
(Maximum characters 1-255)
Default Setting
None
Command Mode
Ethernet Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# description Ethernet
ProCurve Access Point 530(ethernet)#

dns primary

This command establishes the primary DNS server address. The no version of
the command clears the primary IP address, if one is set and does not require
for the IP to be specified.
Command Line Reference
Ethernet Interface Commands
9-93