Bosch D1255RB User Manual page 39

Table 6: Log Event Definitions (continued)
Text Definition
DATE CHG
User changed control panel's date or time.
EXTRA PT
Incorrectly programmed point connected to
system.
FIRE ALARM
Fire alarm at point in area specified.
FIRE END Fire Walk Test ended.
FIRE RSTOR
Fire alarm at point specified restored.
FIRE TRBLE Trouble condition at point specified.
FIRE START
Fire Walk Test started.
LOG FULL
Control panel log is full. New event overwrites
oldest event.
LOG THRES
Control panel log reached programmed
threshold (Log % Full).
MISS FIRE
Fire point specified missing.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 13.0
Table 6: Log Event Definitions (continued)
Text Definition
MISS TRBLE
Point in area specified missing. Area disarmed.
PARAM CHG
Control panel programming changed.
PHONE FAIL
Control panel detected phone line specified as
faulted.
PHONERESTOR
Phone line specified detected as restored from
faulted condition.
PROG
Event modifier for BYPASS, RELAY SET, and
RELY RESET events. Indicates function
initiated from local programmer.
PROG BAD Attempt to access control panel with a local
programmer failed.
PROG OK
Control panel successfully programmed by a
local programmer.
PT TESTED
This point walk tested.
Log Event Definitions
39