Bosch D1255RB User Manual page 31

6. The system now disconnects telephones that share its
telephone line during the remote programming session.
Hang up the telephone now.
7. The display changes to SYSTEM PROGRAM.
8. At the conclusion of the programming session your
system sends a report to the security company and then
returns your telephone to normal service and your
display to idle text.
Bosch Security Systems, Inc. | 8/06 | F01U011793B
Fire System | User's Guide | 11.0
Beginning a Remote Programming Session for a System
with a Phone Number
1. Ensure that your system is at idle text.
2. Call this phone number:
________________________________________________
This number is designated for the Remote Programming
Software (RPS). Make the call using the telephone
located at:
_____________________________________________
3. Identify yourself and your premises (account number,
name, address, and so on) and advise the operator of the
services you wish to have performed.
4. Press the [ESC] key to enter the menu, then press
[NEXT] repeatedly until you reach the REMOTE
PROGRAM ? prompt.
5. Press [ENT]. The display shows CALL RPS ?
System Functions
31