Time Shifting (Pause Live Recording) - Sharp TU-R252H Operation Manual

VOLUME CONTROL
The volume level of the sound from the receiver can
be altered with the VOL+ and VOL- buttons on the
remote control handset. Pressing either button
displays a bar graph of the sound volume on the TV screen.The volume level selected will remain set,
even when the receiver is turned off and on again, until it is altered with VOL + and VOL - buttons.The
audio volume adjustment for the receiver is independent of the volume control on your TV set. Be
careful that both volume controls are kept within reasonable levels so that when switching from
analogue to digital television viewing, or when first turning on your TV set, the sound level is not too
high.
You can silence the sound from the receiver by pressing the MUTE button. The sound
remains muted until the MUTE button is pressed again, the VOL + or VOL- buttons are
pressed. While the sound is muted in this way, the mute symbol is displayed in the top
left of the TV screen. The symbol is removed after 3 seconds, but the sound will remain
muted until the MUTE button is pressed for the second time and the mute symbol will display for 3
seconds.
PIP (PICTURE-IN-PICTURE)
Enables / disables PIP window.
Ø PIP +: next channel in PIP
window.
Ø PIP - : previous channel in PIP
window.
NOTE: PIP is only available when LOOP
THROUGH is connected. (Please see
page connection diagrams)
SWAP
Switching between main and PIP window,
is possible by pressing SWAP on the
remote control.
Note: If you press SWAP on the remote control while the PIP window is not activated, HDMI resolution
changes.

TIME SHIFTING (PAUSE LIVE RECORDING)

Pause Live Recording is a feature that
enables you to pause a live broadcast if,
say the phone rings you can go back to the
same spot that you were at when you left.
The live broadcasting can be stopped any
time. Press PAUSE
control to suspend the broadcasting. In the
INFO banner the timeshift will comence.
The duration of Timeshift can be adjusted
from Recordings in the Configuration menu
(See 5.1.RECORDINGS). In order to stop
the timeshift press PLAY, PAUSE or OK
the remote control. The paused recording
can be watched in different speeds by
o
using
To terminate the Pause Live Recording press
NOTE:
You can also use the PAUSE button on the front of the unit if you wish.
o
n the remote
o
n
n the remote control.
o
n the remote control.
31