Related Manuals for Clarke SHHH 2
Summary of Contents for Clarke SHHH 2
- Page 1 SHHH AIR COMPRESSOR SHHH AIR COMPRESSOR Model No. SHHH 2/10 Part No: 2320757 OPERATING & MAINTENANCE INSTRUCTIONS © 0805...
-
Page 2: Specifications
Oil Part No..............3050795 PARTS & SERVICE For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com... -
Page 3: Table Of Contents
Thank you for purchasing this CLARKE Shhh Air silent running air compressor Before attempting to operate the machine, please read this leaflet thoroughly and carefully follow the instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the compressor giving you long and satisfactory service. -
Page 4: Safety Precautions
ALWAYS place the compressor on a flat horizontal surface. Electrical or mechanical repairs should only be carried out by a qualified engineer. If problems occur, contact your Clarke dealer. Before carrying out any maintenance, ensure the pressure is expelled from the air receiver, and the machine is disconnected from the mains supply. -
Page 5: Electrical Connections
We recommend that this machine is connected to the mains supply via a Residual Current Device (RCD) If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified electrician, your Clarke dealer, 020 8556 4443 or telephone CLARKE International Service Dept. on: or, e-mail : Service@clarkeinternational.com... -
Page 6: Parts Identification
PARTS IDENTIFICATION Fig.1 PREPARATION FOR USE Fig.2 The compressor MUST be filled with oil before use. A 500mL bottle of Synthetic Oil is provided. Remove the travel plug, fitted to the Oil Filler/ Breather, and fill with oil using the funnel provided, so that the level is midway across the Oil Sight Glass (indicated in Fig.1). - Page 7 This operation is completely automatic and does not affect the spraying process in any way. However, should problems develop with the cut-in, cut out settings, please consult your Clarke dealer, or the Clarke Service Dept.. NOTE: If the machine pumps continuously without cutting out then the compressor is too small for the application/tool being used, and damage may result.
-
Page 8: Shutting Down
1. Check the oil level before you start and top up if necessary - use Synthetic Air Compressor Oil ONLY, available from your Clarke dealer..Part No. 3050795 The oil level is checked by viewing the oil sight glass, see Fig. 1. - Page 9 Clarke dealer. Fig.8 4. Check the Air Filter Should the air filter become dirty, consult your Clarke dealer. 5. Check the Non-Return Valve Should the tank pressure decrease for no apparent reason, it is possible that the non- return valve is leaking.
-
Page 10: Fault Finding
Carefully unscrew the non return valve assembly from the vertical hex. riser, then disassemble. Clean or renew the rubber disk before reassembling. With the valve restored, start the machine with the flexible pipe disconnected to check for leaks. If leaks persist, renew the valve assembly, otherwise reconnect the flexible pipe. -
Page 11: Accessories
For details contact your local Clarke dealer. A complete kit - Model KIT 600, illustrated below, is available from your Clarke dealer, ideal for many applications..Please quote part number 3110150...
Need help?
Do you have a question about the SHHH 2 and is the answer not in the manual?
Questions and answers