CHAPTER 1 Network Environment Setup and Tool Installation
1.6 Management Tool Operating Conditions and Use
1. Login to MMB CLI and specify partition to which you intend to connect.
If the message which confirms whether you connects or not appears, input 'y'.
2. If the message "Do you really want to start the Console Redirection (yes/no)?" appears, input 'yes'.
You can connect to specified partition.
3. If you connect to other partition, perform step 1 and step 2 again after closing current console redirection.
To close the console redirection, perform either of below operation:
-
Press [ESC] key and then press [(] key.
-
Press [~] key and then press [.] key.
Forced disconnection of console redirection
Note
Only one user at a time is permitted to use the console redirection function.
1. If a user attempts to connect using the function while another user is using it, the message "Console
Redirection already in use" appears. The window appears as follows.
FIGURE 1.17 Example of setting partition #3 (1)
FIGURE 1.18 Example of setting partition #3 (2)
21
C122-E175-02EN