Throttle Override System; Speed Limiter - Yamaha BANSHEE 350 Owner's Manual

EBU00064

Throttle OverRide System

If during operation, the carburetor or the throt-
tle cable should malfunction and will not close
fully, take your thumb off the throttle lever.
The Throttle OverRide System immediately
cuts off the ignition.
q WARNING
POTENTIAL HAZARD
Continuing to ride the ATV after the
Throttle OverRide System (T.O.R.S.) has
stopped the engine.
WHAT CAN HAPPEN
Riding with a malfunction increases the
chance for an accident and injury.
HOW TO AVOID THE HAZARD
Make sure that the cause of the malfunc-
tion is corrected before restarting the
engine. You should have the ATV
inspected by a Yamaha dealer.
EBU11590

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is pushed
to the maximum. Turning in the adjusting screw
limits the maximum engine power available and
decreases the maximum speed of the ATV.
a
1. Locknut
a. No more than 12 mm (0.47 in)
4-4
w
q
2. Adjusting screw