Related Manuals for Toshiba 42XV600A
Summary of Contents for Toshiba 42XV600A
- Page 1 WNER'S ANUAL Integrated Digital LCD TV Owner's Record 42XV600A 46XV600A TOSHIB 52XV600A © TOSHIBA CORPORATION, 2009 VX1A00143900 TD/J All Rights Reserved...
-
Page 2: Table Of Contents
Contents Introduction ....................3 Welcome to Toshiba ........................ 3 Important Safety Instructions ....................3 Important information ......................7 Getting started ..................8 Connecting an aerial ........................ 8 Exploring your new TV ......................8 TV top, front and side panel controls ..................9 TV back panel connections .................... -
Page 3: Introduction
Introduction The TV may drop or fall off which may cause an Welcome to Toshiba injury or damage. • Thank you for purchasing this Toshiba LCD Colour TV. This manual will help you use the exciting features of your new TV. • Instructions in this manual are based on using the remote control. • Please read all safety and operating instructions in this manual carefully, and keep this manual for future reference. - Page 4 Introduction 6) Never place the TV in an area exposed to 9) Precautions for moving the TV high humidity levels, such as in a bathroom • When moving the TV, be sure to remove or close to a humidifi er. the plug from the wall outlet and disconnect This may cause a fi re or an electric shock.
- Page 5 Introduction 4) Never stand or climb on the TV. • Educate children about the dangers of 1) Never place hot objects or open fl ame climbing on furniture to reach the TV or its sources, such as lighted candles or controls.
- Page 6 Introduction 7) Never cut, break, modify, twist, bunch up or 3) If the TV is dropped or the cabinet is broken, bent the cord or apply excessive force or turn off the TV and remove the power plug tension to it. from the outlet immediately.
-
Page 7: Important Information
Exemptions 2) Periodically disconnect the power plug from the outlet and check it. • Toshiba is not liable for any damage caused by fires, If dust has collected on the power plug natural disaster (such as thunder, earthquake, etc.), acts connectors, clean off the dust with a dry cloth. -
Page 8: Getting Started
Insert two R03 (AAA) batteries matching the –/+ Your Toshiba dealer or service personnel can best advise polarities of the battery to the –/+ marks inside the battery you on which aerial to use in your area. -
Page 9: Tv Top, Front And Side Panel Controls
Getting started TV top, front and side panel controls • You can operate your TV using the buttons on the side panel or the remote control. The back and side of the panel provide the terminal connections to connect other equipment to your TV ( - “Connecting your TV” pages 35 – 47). • For the use of each control, see the pages in brackets. TV top view TV front view Right side view You can swivel the TV screen. -
Page 10: Tv Back Panel Connections
Getting started TV back panel connections TV back view * You can use the cable holder to hold the aerial cable, video and audio cables etc. RGB/PC Never grasp the holder HDMI 1 ( AUDIO ) COMPONENT COMPONENT when moving the TV. VIDEO INPUT VIDEO INPUT DIGITAL... -
Page 11: Learning About The Remote Control
Picture size (- page 19) (Four coloured buttons : Red, MENU (- page 14) Green, Yellow, Blue) (- page 30) To switch between ATV When using Toshiba DVD Player : (Analogue TV) and DTV Press to EJECT (DTV TV/DTV RADIO/DTV TEXT) - Page 12 Getting started Location of controls for REGZA-LINK mode Set to REGZA-LINK To turn the device On/Off Number buttons for the device To select input from external source To mute AV amplifier To change volume of Position U / u AV amplifier To exit menu To operate menu To return to previous menu accessed...
-
Page 13: Turning The Tv On
Getting started Turning the TV on Press v or w to select the menu language English or Français . Press s to select Time Zone , and then press v or w Switching on the TV to select the item you want to set. (New South Wales, Connect the power cord to a wall outlet. -
Page 14: Using The Quick Menu
Getting started Notes: Learning about the menu system The Quick Setup menu can also be displayed at any time from the SETUP menu. We suggest you familiarize yourself with the display charts before using the menu system: Using the Quick Menu • Press MENU to display menu, and then press v or w to select main menu headings. -
Page 15: Programming Channels Into The Tv's Channel Memory
Getting started Notes : Press s to select Auto Tuning , and then press Q . • The same menu is displayed in DTV (Digital TV) A screen will appear warning that previous settings and ATV (Analogue TV) modes; however, some will be deleted. - Page 16 Getting started C. Colour System With the list of channels now showing, press s or r A : Automatic, P : PAL , S : SECAM, to select the channel you want to move and press w . N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz) If the colour of a certain channel is abnormal, the ATV Manual Tuning automatic colour system selection (A) may have...
-
Page 17: Watching Tv Programmes
Getting started Channels Watching TV programmes The DTV channel order may be changed to suit your personal preference. Programme Selection From the SETUP menu, press s or r to select DTV Digital programmes Settings and press Q . After you have tuned the TV, you have several ways to Press s or r to select Channels , and then press Q . -
Page 18: Selecting The Menu Language
Getting started Selecting the menu language The information will disappear in 60 seconds. On-screen information contains the following Choose from 2 different languages (English or Français) information: for the On-Screen-Display. • Current Channel Number • Channel Name Press MENU , and then press v or w to display the • Skip (if set) (8) SETUP menu. -
Page 19: Using The Tv's Features (General)
Using the TV’s features (General) Cinema Picture adjustment When watching “all sides panel format” films/video tapes, this setting will eliminate or reduce the black bars on all Most of the picture controls and functions are available in sides of the screen by zooming in and selecting the image both digital and analogue modes. However features not without distortion. available will be greyed out. - Page 20 Using the TV’s features (General) Adjusting the Picture Position PC Wide - analogue only - Use this setting for a PC connected via HDMI or RGB/ Adjustment to the position of the picture may be made to PC terminal when receiving PC signal format. This setting suit your viewing preferences.
- Page 21 Using the TV’s features (General) Adjusting Black/White Level • Store mode is only available when Location is set to Store. Black/White Level improves the definition of dark areas • Game mode is available in external input mode of the picture. (other than aerial input). When you select Game From the PICTURE menu, press s or r until mode, suitable widescreen formats will be Advanced Picture Settings is selected.
- Page 22 Using the TV’s features (General) Adjusting the Colour Temperature Press Q to confirm the adjustment. Colour Temperature increases the ‘warmth’ or To cancel the adjustment when selecting a point, select ‘coolness’ of the picture by increasing the red or blue tint. Cancel and press Q . To return the settings of all points to the factory From the Advanced Picture Settings menu, press defaults, select Reset , and then press Q .
-
Page 23: Using Expert Mode
Using the TV’s features (General) Activating MPEG NR (Noise Reduction) Using Expert Mode If the incoming MPEG signal exhibits noise (is grainy), This feature allows you to turn the colours red, green and depending on the compression and conversion, the noise blue on/off individually in order to adjust each colour more may be reduced when using this function. -
Page 24: Sound Adjustment
Using the TV’s features (General) Using Auto Format Selecting Dual 1 or Dual 2 mode When the TV receives a true HDMI signal picture and You can hear only Dual 1 or Dual 2 sound, when bilingual Auto Format is On, the picture will automatically be programmes are received. -
Page 25: Other Feature Settings
Using the TV’s features (General) Using the Advanced Sound Settings Other feature settings Surround and Dynamic Bass Boost help to create an enhanced surround sound experience with deep, rich bass Activating Blue Screen from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. -
Page 26: The Timers
Using the TV’s features (General) On Timer The timers The feature allows you to set the TV to turn on automatically to a preset channel or input at a certain time Setting a Programme Timer - digital only - of day or after a certain length of time. When On Timer is This feature will set the television to go to a specific set to On , the green on timer indicator on the front of the channel at a certain time. -
Page 27: Resetting The Tv
Using the TV’s features (General) Setting the Sleep Timer Selecting the video input source The Sleep Timer is especially useful if you want the TV to turn itself off after a selected period of time. At any time by pressing on the remote control or TV, a list will appear on screen showing all inputs and From the APPLICATIONS menu, press s or r to... -
Page 28: Setting The Manual Settings
Using REGZA-LINK This feature uses CEC (Consumer Electronics Controls) Press MENU , and then press v or w to display the technology and allows the control of Toshiba REGZA- SETUP menu. LINK compatible devices from the TV remote control via HDMI connection ( - page 41). - Page 29 Using the TV’s features (General) REGZA-LINK input source selection Speaker Preference This feature allows the Speaker Preference to be set When devices that use CEC technology have been to TV Speakers or Amplifier . The Amplifier option connected, the REGZA-LINK icon will be displayed in allows the remote control to adjust or mute the volume of the input source list.
-
Page 30: Teletext
Toshiba dealer. picture. Press again to return to normal TV mode. You need to return to normal viewing if you wish to change channels. -
Page 31: Subtitles
Using the TV’s features (General) Note: To view these pages, use the coloured prompt buttons, It will not be possible to change TV channels while e.g. press the Green button to view page 200. in Teletext mode. You will have to cancel Teletext first by pressing i to return to normal TV picture. -
Page 32: Other Digital Tv Features And Settings
Other Digital TV features and settings Using the Genre Colour Setup/Search Using the EPG (Electronic From the guide screen, you can use the genre selection and Programme Guide) search features. Press the R button from the guide screen. Select the on-screen guide by pressing Q , the guide screen will appear highlighting details of the channel Press s or r to highlight Genre Colour Setup in and programme currently being viewed. -
Page 33: Digital Settings - Channel Options
Other Digital TV features and settings Digital settings - Channel Options Digital settings - PIN Setting In order to prevent unwanted access to certain menus and Skipping Channels settings, a security PIN code can be set. This feature allows you to set channels that will be skipped Setting the PIN when P u or P U are used to tune. -
Page 34: Using The System Information
Information is selected. A screen will appear displaying all of the licencing Press Q to display the System Information . information required for the TV’s software. System Information TOSHIBA Digital Output Format 2009 2.1.26.0 Apr 20 2009 - 15:56:50 FW:13 WEAK... -
Page 35: Connecting Your Tv
Connecting your TV Notes: Back connections • DO NOT connect the DIGITAL AUDIO output terminal to the AC-3 RF input of a Dolby Digital Receiver with a built-in Dolby Digital decoder. Connection example • Connect the DIGITAL AUDIO output terminal to the OPTICAL input of a receiver or processor. -
Page 36: Side Connections
Connecting your TV Connecting an amplifier equipped with a Side connections digital audio (optical) input You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the TV o (2) . Amplifier equipped with Please always refer to the owner’s manual of the equipment digital audio input to be connected for full details. -
Page 37: Connecting Hdmi And Dvi Devices
Connecting your TV Connecting an HDMI device Connecting HDMI and DVI devices One HDMI cable (type A connector) is needed. • When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. Back of TV • When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. Right side of TV • This TV may not be compatible with features and/or specifications that may be added in the future. • This TV is only operable with L-PCM on 32/44. 1/48 kHz and 16/20/24 bits. If there is no sound when using HDMI, use the analogue audio cables to connect the TV and the HDMI device and select Analogue for HDMI 1 Audio of the AV Connection menu ( - page 38). -
Page 38: Selecting The Pc/Hdmi 1 Audio Mode
Connecting your TV Selecting the HDMI settings Standard analogue audio cables An HDMI-to-DVI adapter cable transfers only video. The HDMI Settings menu consists of the following 3 Separate analogue audio cables are required. items: Lip Sync , INSTAPORT™ and RGB Range . Some early HDMI equipment may not work properly with your HDMI TV. -
Page 39: Connecting A Computer
Connecting your TV Signal names for mini D-sub 15 pin connector Connecting a computer Pin assignment for RGB/PC terminal To connect a PC to the RGB/PC terminal on the TV: An analogue RGB (15 pin) computer cable can be connected. Back of TV Pin No. -
Page 40: Using The Pc Settings
Connecting your TV Adjusting the clock phase of the picture Using the PC Settings If the clock phase, which synchronizes the PC signal and LCD display, is not optimized, the picture will blur. • Most of the picture controls and functions are available in both digital and analogue modes. However features This function allows you to adjust clock phase and display not available will be greyed out. a clear picture. -
Page 41: Regza-Link Connection
HDMI cables with the HDMI Logo ( • This function is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual owner’s manuals for compatibility information. -
Page 42: Using The Media Player
FAT12, FAT16 and FAT32 Manual start: You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba Insert a USB device into the USB terminal or an SD cannot and does not grant such permission. - Page 43 Connecting your TV Playing DivX files ® Note: If the previous or next file is not compatible, it will (only for USB devices) be skipped automatically. Note: To select a language: Some DivX files will not play without registration of ®...
-
Page 44: File Compatibility
Connecting your TV File Compatibility To pause playback: Press g during playback. File format: DivX ® To resume normal playback, press c . Maximum video resolution: 720 × 480 (30 fps), Total number of files: Less than 500 per folder To play in fast reverse or fast forward directions: Press ` or a during playback. -
Page 45: Viewing Jpeg Files
Connecting your TV Viewing JPEG files To set the Slide Show mode settings: Press R during Slide Show mode. To view in Single View mode: Press s or r to highlight the item (Interval Time or When the thumbnail window appears after starting the Repeat). -
Page 46: Using The Photo Frame Feature
Connecting your TV Open from Quick Menu Using the Photo Frame feature Press R to open the QUICK Menu . • You can use the TV screen as a digital picture frame. Press s or r to select Photo Frame , and then press One image (pre-installed or user-installed) can be Q to open Photo Frame . - Page 47 Connecting your TV Photo Edit Select Start , and then press Q . Press s or r to select Photo Edit , and then press Apr/26 (Tue) AM 10:53 Press s or r to select Rotate or Delete . Photo Edit Notes: Rotate Delete...
-
Page 48: Reference Section
• Make sure the power cord is plugged in, and then press ! reached the end of its life. Contact a service technician. or 1 . • The remote control batteries may be dead. No REGZA-LINK operation Replace the batteries. • The REGZA-LINK feature is available for Toshiba No picture, no sound REGZA-LINK compatible devices. • Make sure HDMI cables with the HDMI logo are used. • Check the antenna connections. • When a connected REGZA-LINK device does not work... -
Page 49: Appendix
Reference section APPENDIX AUSTRALIAN PARENTAL GUIDANCE CODES (Normative) Recommended On-Screen-Display for parental guidance codes transmitted within DVB-SI EIT information using the DVB parental_rating_descriptor. Receiver Menu Set-up and Suggested OSD wording for Setting Blocking (Restriction of access) Block G Block Block Block Block Block... -
Page 50: Specifications
52XV600A : 314 W, 0.6 W (standby) 52XV600A : 132.1 cm Dimensions Number of pixels 42XV600A : 1,009 mm (W) 694 mm (H) 308 mm (D) 1,920 (H) dots × 1,080 (V) dots 46XV600A : 1,108 mm (W) 746 mm (H) 308 mm (D) Audio power... -
Page 51: Supplied Accessories
Reference section Operating condition Temperature 0 °C - 35 °C Humidity 20 % - 80 % (No moisture condensation) Supplied accessories Owner’s manual (1), Remote control (1), Batteries (2), Clip (1), Cleaning cloth(1) This is used to fix the TV to a wall, pillar, etc. ( - page 4). • Design and specifications are subject to change without notice.