PLEASE DO NOT DISCARD THIS MANUAL AS YOU MAY NEED IT AGAIN IN THE FUTURE! Your ONE FOR ALL 3 can operate three devices: a Television, a Video Recorder and a DVD Player. Your ONE FOR ALL 3 remote needs to be powered by 2 new “AA/LR6” Alkaline batteries. WWW.ONEFORALL.COM...
Installing the Batteries Your ONE FOR ALL 3 Remote needs 2 new "AA/LR6" Alkaline batteries. Remove the battery cover from the back of your ONE FOR ALL 3 by pressing down on the arrow on the battery cover and sliding it back- wards.
Page 5
If on your original remote control these keys are used for Menu operation, the ONE FOR ALL 3 Remote will operate the same. Important note: For a more detailed explanation of the Teletext and Fastext functions, please refer to the manual of your television.
Before you start, please read these instructions carefully Setting Up Your Devices Example: To set up the ONE FOR ALL 3 for your television: Make sure your device (television) you wish to ope- rate is switched on (not in standby).
The Search Method If your device does not respond to the ONE FOR ALL 3 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 3.
Once you have Set-Up your ONE FOR ALL 3, you can blink back your Set-up Code for future reference. Example: to blink out your television code: Press the TV key once. Press and hold down MAGIC until the ONE FOR ALL 3 red light blinks twice (the red light will blink once then twice).
Now press the DVD key (the device mode key you want changed) and the red light will blink twice. The DVD key of the ONE FOR ALL 3 is now ready to be set-up for your Television. To enter the Set-up code for your second TV, proceed with the setup procedure on page 6 remembering to use TV codes for the DVD key.
To scan the channels on your TV: Aim the ONE FOR ALL 3 at your TV. Press the TV key. Press and relea- se MAGIC then press the MUTE key. The ONE FOR ALL 3 will send the command to advance through all the channels available on your television stopping at each channel for about three seconds.
Press and hold MAGIC until the red light blinks twice. Press 9 7 0. The red light will blink twice again. Now your ONE FOR ALL 3 is setup to use the ONE FOR ALL Sleeptimer on the device you selected in the setup above.
ONE FOR ALL Recall function. The ONE FOR ALL Recall function allows you to program up to two channels, each consisting of a maximum of 4 key presses per channel entry. This allows you to swap back and forth between two channels with the press of a single key.
Customer Service If you still have questions about the operation of your ONE FOR ALL 3 universal remote and could not find the answer(s) in the trouble shooting section, you may want to contact the customer service department for assistance.
Page 20
GARANTIA A UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a protecção deste produto no que respeita a defeitos de fabrico de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra do mesmo produto.
Need help?
Do you have a question about the 3 and is the answer not in the manual?
Questions and answers