Sharp MD-R3H Operation Manual page 22

(Continued)
MUSIC
SCAN
PLAY
MODE
DISC
DISC 12
(When you have selected a CD)
2
TOC DISC
PRGM
3
4
TOC DISC
PRGM
5
TOC DISC
TOTAL
PRGM
When you press the ENTER button
TOC DISC
PRGM
Music scan play
(Remote control operation)
PROGRAM
1
CLEAR Select the desired programme source, CD or MD, by pressing
the CD
MD
2
Press the MUSIC SCAN button whilst in the stop mode.
CD
"M.SCAN PLAY" will appear.
Starting from the first track, approximately the first 12 seconds
at the beginning of each track will be played.
After the last track has been played, the unit will stop auto-
1 2 3 4 5 6 7
8 9 10 11 12 13 14
matically.
15 16 17 18 19 20
When one or more CDs are inserted and music scan play is
started, all of the tracks on all of the CDs will be played in
order, until the last track on the last CD is reached. Then the
4 0dB OVER
unit will stop.
1 2 3 4 5 6 7
8 9 10 11 12 13 14
You cannot select just one of the discs for music scan play.
15 16 17 18 19 20
To stop music scan play:
Press the CD
To perform music scan play repeatedly:
During music scan play, press the PLAY MODE button until "
appears.
Note:
You can also select repeat play before music scan play.
To programme selected tracks during music scan
play: (Music scan programme selection)
During music scan play, the current track being previewed can
be stored in memory.
1
Select the desired programme source, CD or MD, by pressing
the CD
2
Press the PROGRAM button.
"PRGM" will flash.
3
Press the MUSIC SCAN button.
"M.SCAN PRGM" will appear.
4
Press the PROGRAM button whilst playing the beginning of
2 3
a track to be stored in memory.
5
To halt the programme, press the CD
When you have selected an MD, the unit will enter the stop
mode.
2 3 5
When you have selected a CD, "M.SCAN REC?" will appear.
To halt the programme, press the CD
When you press the ENTER button on the main unit whilst
"M.SCAN REC?" is displayed, you can record the pro-
grammed tracks.
To clear the programmed selections:
Press the CLEAR button on the remote control to turn off
12 4 0dB OVER
2 3 5 "PRGM".
When you use the DELETE/CLEAR button on the main unit, all
of the programmed contents will be erased by holding it down
for at least 2 seconds.
The programme contents will be erased.
E-16
MD-R3H
or MD button.
or MD button.
or MD button.
R
"
or MD button.
button again.