Subwoofer Preparation - Sharp CP-SW1000W Operation Manual

2
4
3
Note:
Before using remote control, please remove plastic shield at battery
holder.
Remote control
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. TV Operation Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . 8
TV Operation Buttons (Only SHARP TV):
On/Stand-by Sets the TV
Button power to
"ON" or
"STAND-BY".
Volume Up and Turn up/
Down Buttons down the TV
volume.
Note:
Some models of SHARP TV may not be operable.
Plastic shie
Remote
control
Battery holder
Reference page
Input Select Press the
Button (TV) button to
switch the
input source.
Channel Up and Switch up/
Down Buttons down the TV
channels.

Subwoofer preparation

Make sure to unplug the AC power lead before installing the main
unit or changing the position.
Select from three installation methods according to the preferred
position.
Horizontal position
Using spikes
1
Tighten all spikes as shown
Notes:
When attaching the spikes, place the subwoofer on a cushion or
soft cloth to avoid damage.
The subwoofer can be leveled by adjusting the spikes.
Caution:
When using these spikes on glossy or slippery table such as on glass
top, this subwoofer may slip and fall off the table.
Using foot cushions
1
Attach the foot cushions as shown
Note:
When attaching the foot cushions, place the subwoofer on a cushion
or soft cloth to avoid damage.
1
Vertical position
Place subwoofer stand as shown
Stand
CP-SW1000W
ENGLISH
E-4