Programming Clock; Setting The Time; Timed Cooking - Smeg Oven User Manual

3.6 Programming clock

1 Timer key
2 End of cooking key
3 Time setting and reset key
4 Value decrease key
5 Value increase key

Setting the time

On the first use, or after a power failure, the
display flashes at regular intervals. Press
to stop the flashing. Press
seconds to start the procedure for setting
the current time. Use key
increase or decrease the time value by one
minute for each pressure until setting the
required time. The clock starts working 5
seconds after the last key pressure.
Use

Timed cooking

1. After selecting a cooking function and
2. To set the cooking time press key
again for two
or to
3. Once the required time is obtained,
4. The display will show the current time,
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
temperature, press key
moves to position 12 and the symbol
will flash on the display.
within 5 seconds: each pressure on
adds 1 minute to the cooking time,
and every 12 minutes a new internal
segment will light up (the example below
shows a cooking time of 1 hour).
cooking will start about 5 seconds after
the last pressure on
represented by the constantly illuminated
segments, and the minutes left to the end
of cooking, represented by the flashing
. The pointer
or
or .
15