Feature Menu - Sanyo LCD TV Owner's Manual

Feature Menu

Sleep Timer
Press " " or " " button to select Sleep Timer. Use
" " or " " button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press " " or " " button to select Child Lock.
Use " " or " " button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons will not work.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
Language
Press " " or " " button to select Language. Use "
" or " " button to select the Language.
Default Zoom
While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press " " or " " button to select Default Zoom. You
can set Default Zoom to Panoramic, 16:9, 4:3 or
14:9 by pressing " " or " " button.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
By pressing " " or "
Background. Press " " or " " button to set Blue
Background as On or Off.
01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 23 01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 23
" button, select Blue
English - 23 -
Menu Background
Press " " or " " button to select Menu Background.
You can set menu background level by pressing "
" or " " button.
Power Save Mode
You can reduce energy consumption by using this
feature. Press Up or Down button to select Power
save mode. You can set Power save mode as On or
off by pressing Left or Right button.
When power save mode is activated, picture mode
will be set to Natural and Backlight setting will be
Minimum. These settings will not available to be
changed.
If you select Power Save Mode as Off, picture mode
will be set to Dynamic and Backlight setting will be
Maximum. Then you can change these settings as
desired.
Backlight
This setting controls the backlight level. Select
Backlight by pressing " " or " " button. Press"
" or " " button to set Backlight to Auto, Medium,
Maximum or Minimum.
When power save mode is activated, backlight setting
will be set to Minimum and it will be unavailable to be
changed. If you select Power Save Mode as Store,
backlight will be set to Maximum. Then you can
change these settings as desired.
Menu Timeout
To set a specifi c display timeout for menu screens,
set a value for this option.
Press " " or " " button to select Menu Timeout. Use
" " or " " button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
Press " " or " " button to select Teletext Language.
Use " " or " " button to change Teletext Language to
West, East, Turk/Gre, Cyrillic, Arabic or Persian.
Ext Out
Press " " or " " button to select Ext Out. Use " " or
" " button to set the Ext Out as On or Off.
Note:
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
"On" to EXT Out from feature menu.
Ext Out should be On in order to use Timers function
in the DTV mode.
HDMI PC Full Mode
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
27.02.2010 13:56:04 27.02.2010 13:56:04