Information Banner; Electronic Programme Guide (Epg) - Sanyo LCD TV Owner's Manual

according to LCN (logical channel number). Select
"NO" for using frequency sort. (This feature is
available for only Germany,Austria and Italy country
option)
After this operation, the following menu will appear
on the screen, asking for analog channel search:
To search for analogue channels, select "Yes". TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels.
Set Language item by pressing " " or " " button.
Press " " or " " button to highlight Country item and
then use " " or " " to set. Press " " or " " button
to highlight TXT. Language. Set TXT Language by
using " " or " " button. To cancel, press the BLUE
button.
You should select "?" for Australia country option.
When fi nished, press OK or RED button to continue
and the following OSD will be displayed:
After automatic tuning is fi nalized, a programme list
will appear on the screen. In the programme list you
will see the programme numbers and names assigned
to the programmes.
If you do not accept the locations and/or the names
of the programmes, you can change them in Program
table. For details, see the section, "Program table".
General Operation
Press the "SOURCE" button on the remote control
and select DTV/USB to switch the TV set to digital
terrestrial television broadcasting.

Information Banner

• Whenever you change the channel using the P + or
P - button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 12 01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 12
• The information banner can also be displayed by
pressing the INFO button at any time while watching
the TV. Pressing INFO button again removes the
banner.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:

Electronic Programme Guide (EPG)

Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
• Press EPG button to view the EPG menu.
• Press " " or " " buttons to navigate through
channels.
• Press " " or " " buttons to navigate through the
programme list.
RED button (Shrink): makes the info boxes
smaller.
GREEN button (Expand): makes the info boxes
larger.
YELLOW button (Prev. Day): displays the
programmes of previous day.
BLUE button (Next day): displays the programmes
of the next day.
INFO (Details): displays the programmes in detail.
OK (View / Timer): shows the highlighted channel /
sets the reminder for future programmes.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
SWAP: Jump to current broadcast.
0 (SEARCH): activates "Guide Search" window
English - 12 -
27.02.2010 13:55:56 27.02.2010 13:55:56