Siemens Cooker hood Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Ventilation Hood
  5. Cooker hood
  6. Operating and installation instructions
Siemens Cooker hood Operating And Installation Instructions

Siemens Cooker hood Operating And Installation Instructions

Hide thumbs Also See for Cooker hood:
Table of Contents

Advertisement

Quick Links

See also: Operating and Installation Instruction
Operating and
installation instructions

Advertisement

Table of Contents
loading

Related Manuals for Siemens Cooker hood

Summary of Contents for Siemens Cooker hood

  • Page 1 Operating and installation instructions...
  • Page 2 Fig. 1 Abb. 1 ELECTRO...

  • Page 3: Operating Modes

    Instructions for use: Operating modes Circulating-air mode: Exhaust-air mode: An activated carbon filter must be fitted The extractor-hood fan extracts the for this operating mode (see Filters and kitchen vapours and conveys them maintenance). through the grease filter into the atmosphere.

  • Page 4: Before Using For The First Time

    Before using for the first time Important notes: Before using your appliance for the first The Instructions for Use apply to several time, please read these Instructions for versions of this appliance. Accordingly, Use carefully. They contain important you may find descriptions of individual information concerning your personal features that do not apply to your safety as well as on use and care of the...

  • Page 5: Safety Instructions

    Before using for the first time Safety instructions Do not flambé food directly under the Never allow children to play with the extractor hood. appliance. Risk of grease filter catching fire due Do not let adults or children operate the to flames.

  • Page 6: Operating Procedure

    Operating procedure Intensive setting: The most effective method of removing vapours produced during cooking is to: Maximum power is obtained at the intensive setting . It is only required for Switch the ventilator ON short intervals. as soon as you begin cooking. Switch the ventilator OFF a few minutes after you have finished cooking.

  • Page 7: Filters And Maintenance

    Filters and maintenance Grease filters: Removing and inserting the metal grease filters: Metal filters are used to trap the greasy Warning: The halogen bulbs must be element of the vapours that develop switched off and cool. during cooking. 1. Press the catch on the grease filters The filter mats are made from non- inwards and fold the filters down.
  • Page 8 Filters and maintenance Activated carbon filter: Installation and removal: Warning: The halogen bulbs must be For neutralizing odours in recirculating switched off and cool. mode. 1. Remove the metal-mesh filters Caution: (see "Removing and inserting the metal- As the filter becomes more and more mesh grease filters").

  • Page 9: Cleaning And Care

    Cleaning and care Isolate the extractor hood by pulling out Stainless steel surfaces: the mains plug or switching off the fuse. Use a mild non-abrasive stainless steel cleaner. Do not clean the extractor hood with Clean the surface in the same direction abrasive sponges or with cleaning agents as it has been ground and polished.

  • Page 10: Replacing The Light Bulbs

    Replacing the light bulbs Bulbs: Halogen bulbs: 1. Switch off the extractor hood and pull 1. Switch off the extractor hood and pull out the mains plug or switch off the out the mains plug or switch off the electricity supply at the fuse box. electricity supply at the fuse box.

  • Page 11: Installation Instructions

    Installation Instructions: Important information Additional information concerning gas Old appliances are not worthless cookers: rubbish. Valuable raw materials can be reclaimed by recycling old appliances. When installing gas hotplates, comply Before disposing of your old appliance, with the relevant national statutory render it unusable.

  • Page 12: Prior To Installation

    Prior to installation Exhaust-air mode The exhaust air is discharged upwards This can be achieved if combustion air can through a ventilation shaft or directly flow through non-lockable openings, e.g. in through the outside wall into the open. doors, windows and via the air- intake/exhaust-air wall box or by other Exhaust air should neither be directed technical measures, such as reciprocal...
  • Page 13 Prior to installation For optimum extractor hood efficiency: Connecting a l 150 mm exhaust-air pipe: Short, smooth air exhaust pipe. Mount the pipe As few bends in the pipe as possible. directly onto the Diameter of pipe to be as large as air outlet on the possible and no tight bends in pipe.

  • Page 14: Electrical Connection

    Prior to installation Electrical connection Preparing the wall If you fit your own plug, the colours of these wires may not correspond with the The wall must be flat and perpendicular. identifying marks on the plug terminals. Make sure that the wall can bear the This is what you have to do: applied loads.

  • Page 15: Installation Preparations

    Installation preparations This extractor hood is intended to be 5. Screw on the fixing bracket for the flue mounted onto the kitchen wall. duct. 1. Remove the grease filter (refer to 6. Screw in the 2 middle screws as an Operating Instructions).

  • Page 16: Installation

    Installation 7. Remove the protective film from the 10. Put on the enclosed protective extractor hood. cardboard for the glass plate. Attach the extractor hood, align and 11. Put on the glass plate and remove screw tightly into place. protective cardboard. 12.

  • Page 17: Installing The Flue Ducts

    Installing the flue ducts 1. Separate the flue ducts by removing the 4. Place flue ducts on the extractor hood, adhesive tape. push the inner flue duct upwards and attach the left and right sides to the 2. Remove the protective film from the two fixing bracket.
  • Page 18 Notes...
  • Page 19 Notes...
  • Page 20 Notes...
  • Page 21 Notes...
  • Page 22 Notes...
  • Page 23 LZ52250...
  • Page 24 E-Mail: siemens-infoline@bshg.com Online-Shop: www.siemens-eshop.com 9000 416 016 Printed in Germany 0109 Es.

Table of Contents