Copying And Renaming Programs - Texas Instruments TI-82 STATS Manual Book

Copying and Renaming Programs

Copying and
Renaming a
Program
Scrolling the
PRGM EXEC and
PRGM EDIT
Menus
To copy all command lines from one program into a new
program, follow steps 1 through 5 for Creating a New Program
(page 16.4), and then follow these steps.
1. Press y [
].
RCL
program editor in the new program (Chapter 1).
2. Press  | to display the
3. Select a name from the menu.
bottom line of the program editor.
4. Press Í. All command lines from the selected program
are copied into the new program.
Copying programs has at least two convenient applications.
You can create a template for groups of instructions that you
use frequently.
You can rename a program by copying its contents into a
new program.
Note: You also can copy all the command lines from one existing
program to another existing program using
The TI-82 STATS sorts
items automatically into alphanumerical order. Each menu only
labels the first 10 items using
To jump to the first program name that begins with a particular
alpha character or q, press ƒ [letter from A to Z or
Tip: From the top of either the
press } to move to the bottom. From the bottom, press † to move to
the top. To scroll the cursor down the menu seven items, press ƒ
†. To scroll the cursor up the menu seven items, press ƒ }.
is displayed on the bottom line of the
Rcl
PRGM EXEC
name is pasted to the
prgm
and
PRGM EXEC
through
1
PRGM EXEC
menu.
RCL
.
menu
PRGM EDIT
, then .
9 0
].
q
PRGM EDIT
or menu,
Programming 16–7