Advertisement
1 at the start of this guide), and
carefully push the locking lever
inside the mounting device (2)
towards the suction cup to create
a vacuum between the suction cup
and the windscreen. Check that
the suction cup is firmly attached.
Set to the desired position
Do not adjust the mounting device
while driving.
To set the top of the mounting
device to the desired position,
loosen the two screws in the
middle of the mounting device,
turn the top to the desired
position, and tighten the screws
Mount the mobile holder
To attach a compatible Nokia
mobile holder to the mounting
To detach the mounting device
from the windscreen, carefully
push the locking lever toward the
top of the mounting device (3),
and pull the strap located on the
edge of the suction cup (4).
(5). Ensure that the top of the
device is firmly locked into place.
To set the mounting plate at the
top of the mounting device to the
desired position, loosen the screw
below the plate, turn the plate to
the desired position, and tighten
the screw (6).
plate, use the screw supplied with
the holder.
© 2008 Nokia. All rights reserved.
5
Advertisement
