Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual page 17

Connecting Your TV
Optional connection
if your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video
cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AIJDIO/VIDEO IN on your TV.
For better picture quality, use S VIDEO instead Of the yellow video cable. SVIDEO doe s not
sound you coon the audio cables.
Connecting a TV and Satellite Receiver
1
2
3
From
cable/
antenna
Satellite Receiver
ISM]_S_I_LI_E IN
_ _JDlO R AUDIO L VIOEO
Satellite --_ _ (_-(- I •
L_NE I_T
antenna I _E° _ig "_ "_
cable = = =
L
Rear of TV
-- -- VIDE o IN
_ _DIEo y
Video (yellow)
Audio L (white)
Audio R (red)
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
Connect the coaxial cable from your cable service or antenna to tbe VHF/UI-[F jack on your TV.
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
-_ You can use_fi_ _::)oEo button to switch between the VHF/UHF and V DEO nputs '!:
: H:
F0r better pi_ure quality, UseSvIDEo instead of the yellow video cable, S VIDEO doeS not provide
Sound; you still must connect the audio cables.
12