Step 4 Antennas And Ac Mains Lead; Step 5 The Remote Control - Panasonic SC-HT335 Operating Instructions Manual

4
STEP
Antennas and AC mains lead
FM indoor antenna
≥Connect the AC mains lead after all other connections are complete.
≥Optional antenna connections (➜ page 21).
FM indoor antenna
Affix this end of the antenna where
reception is best.
Adhesive tape
Main unit
FM ANT
(75- )
AM
ANT
EXT
TV TV TV TV
LOOP AUDIO AUDIO AUDI UDIO
IN IN IN IN
3
Loosen the terminal screw
1
Push.
with a Phillips-head
White
screwdriver.
Red
2
Insert the wire fully.
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.5 W). To save power when the unit is not to be used
for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
5
STEP
The remote control
Remote control
2
Insert so the poles (i and j) match those in the
remote control.
3
R6/LR6, AA, UM-3
AM loop antenna
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception
is best.
Keep loose antenna cable away
from other wires and cables.
Click!
4
Black
Batteries
1
≥Do not use
rechargeable type
batteries.
AC IN
5
Re-tighten the terminal screw.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the display (➜ page 8), avoiding obstacles, at a maximum
range of 7 m directly in front of the unit.
AC mains lead
To household mains socket
AC mains lead
RQT8291
7