Setting Date/Time (Clock Set) - Panasonic LUMIX DMC-FX520 Operating Instructions Manual

Setting Date/Time (Clock Set)

We recommend selecting [LANGUAGE]
setting date/time.
•
The clock is not set when the camera is shipped.
1
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A Joystick
2
Press [MENU/SET].
3
Move 2/1 to select the items (year, month,
day, hour, minute or display sequence), and
move 3/4 to set.
A: Time at the home area
B: Time at the travel destination
‚: Cancel without setting the clock.
4
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off.
Then turn the camera back on, switch to recording mode, and check that the display
reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
programme AE mode)
Preparation
(P34)
(P85)
"
procedure below.
- 23 -
from the [SETUP] menu
:
:
"
Changing the clock setting (In
(P29) before
OFF ON
A