Panasonic LUMIX DMC-FX520 Operating Instructions Manual page 114

You can add text (comments) to pictures. After text has been registered, it can be included
in prints using [TEXT STAMP] (P119). (Only alphabetic characters and symbols can be
entered.)
You can use the stylus pen (supplied) if it is hard to operate with your fingers.
1
Touch a picture from thumbnail at the bottom of the screen.
2
Touch [
3
Touch [TITLE EDIT].
4
Enter characters.
•
Touch [ ] to switch text between [A] (capitals), [a]
(small case), and [&/1] (special characters/numbers).
•
The cursor at the entry position can be moved to the
left with touching [ ], and to the right with touching
[ ].
•
To enter a blank, touch []], or to delete an entered
character, touch [DELETE].
•
To stop editing at any time during text entry, touch [CANCEL].
•
A maximum of 30 characters can be entered.
5
Touch [EXIT].
∫ Delete the title
1
4
In step , delete all the texts.
2
Touch [EXIT].
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode can also be registered by using
the operation in steps
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode and [TITLE EDIT] cannot be
registered at the same time.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO-viewer-" bundled software on
the CD-ROM (supplied).
•
You cannot use titles edit for pictures taken with other equipment.
Advanced (Playback)
].
4
and following.
[TITLE EDIT]
- 114 -