Changing The Water Filter - Samsung French Door Refrigerator User Manual

ChANGING ThE WATER FIlTER

The "Filter Indicator" light lets you know when it is time to change your water filter
cartridge. To give you preparation time to get a new filter, the red light will come on just
before the capacity of the current filter runs out. Changing the filter on time provides
you with the freshest, cleanest water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on
the filter as shown. Place a sticker on the filter that dates six months in the
future. For example, if you are replacing the water filter in March, put the
"SEP" (September) sticker on the filter to remind you to replace in September.
Normal filter life is about every 6 months.
2. Remove the new filter's protective cap and remove the old filter.
3. Position and insert the new filter into the filter housing. Slowly turn the water
filter clockwise to align with the printing mark on the cover, locking the filter in
position. Make sure to align the water filter label mark with the center of cover
filter printing as illustrated. Remember, do not over-tighten.
4-1. Once you have completed this process, press and hold the Ice / Water
button for 3 seconds to reset the filter schedule. (Optional)
4-2. Once you have completed this process, hold the Fridge + Power Cool
button simultaneously for 3 seconds to reset the filter schedule. (Optional)
5. Lastly, run about 3L through water dispenser and throw away. Make sure
that water flows clearly again before drinking.
Be sure to flush the dispenser thoroughly otherwise water may drip from the
dispenser. This means that there is still air in the line.
Do NOT use the water or ice dispenser without a water filter cartridge
because the water line may become blocked.
Ordering replacement filters
To order more water filter cartridges, contact your authorized Samsung dealer
30_Operating
Cover filter
1 2 3
Sticker
(month indicator)
Turn until the
labels are aligned.