Samsung SR8850 User Manual
Robotic vacuum cleaner
Hide thumbs
Also See for SR8850:
- User manual (148 pages) ,
- Instrukcja obs?ugi (240 pages) ,
- User manual (48 pages)
Table of Contents
Advertisement
Robotic Vacuum Cleaner
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
User Manual
imagine
the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
SR8850
SR8855
English
Advertisement
Table of Contents
Related Manuals for Samsung SR8850
Summary of Contents for Samsung SR8850
- Page 1 User Manual English ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register...
- Page 2 Safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described WARNING in this manual.
-
Page 3: Important Safety Instructions
Safety information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL •... - Page 4 Safety information ROBOTIC VACUUM CLEANER • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit accidentally turns on.
-
Page 5: Table Of Contents
Contents SAFETY INFORMATION 06 Power related 07 Before use 10 In use Cleaning and maintenance PROdUCT FEATURES 13 Product Features ASSEMBLING THE CLEANER 15 Components 16 Name of each part OPERATING THE CLEANER 20 Installing robotic vacuum cleaner 20 Installation order 20 Turning the power switch on or off 21 Installing the charger 22 Charging... -
Page 6: Power Related
Safety information POWER RELATEd do not bend the power cord forcefully or place a heavy object on it that could break it. WARNING - This may result in fire or electric shock. Make sure to remove any dust or water from the power plug. -
Page 7: Before Use
Safety information BEFORE USE Before activating the robotic vacuum cleaner, make sure that the dust bin is assembled. CAUTION - If the dust bin is not inserted, robotic vacuum cleaner will not operate. Never use robotic vacuum cleaner in locations with combustible material such as: CAUTION - Locations with candles or desk lamps on the floor. - Page 8 Safety information BEFORE USE Remove small objects or brittle items from the area to be cleaned in advance. CAUTION - Make sure to clear any objects before cleaning. - Make sure to remove fragile items such as china, glass objects, flowerpots, etc.
- Page 9 Safety information BEFORE USE Install the charger in a location that can be easily accessed by the robotic vacuum cleaner. CAUTION - If the charger is installed in a corner, this may cause extra movements and may disturb the automatic recharging process. Objects in front of the charger will prevent the robotic vacuum cleaner from auto-charging itself.
-
Page 10: In Use
Safety information IN USE You cannot use the robotic vacuum cleaner on thick carpets. - This may result in problems with the robotic vacuum cleaner. CAUTION - This may result in damage to carpets. do not use the robotic vacuum cleaner on a table or other high locations. -
Page 11: Cleaning And Maintenance
Safety information IN USE Robotic vacuum cleaner cannot completely clean locations that it cannot reach, such as corners, and NOTE spaces between sofas and walls. - Please clean these locations occasionally. dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to pick up dust clusters that were formed while cleaning. - Page 12 - Failing to do so may result in fire or electric shock. Before cleaning the charger, make sure to disconnect the power cord for safety. WARNING Contact the Samsung Electronics customer care center to replace the battery. WARNING - Failing to use original batteries will result in product failure.
-
Page 13: Product Features
Product Features CONVENIENT VIRTUAL GUARd FUNCTION You can confine the robotic vacuum cleaner to a particular section by using the Fence (virtual wall) mode or by cleaning several sections one by one using the Guard (virtual door) mode. • What is ceiling shape recognition (Visionary mapping This function recognizes the shape of the ceiling using the camera on top... - Page 14 Product Features AUTO CHARGING When the battery is low, the robotic vacuum cleaner is automatically guided to the charger to enable it to perform a quick auto charge. EdGE-CLEANING SIdE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges.
-
Page 15: Components
Assembling the cleaner COMPONENTS Main Body ■ Remote Control ■ Charger (Station) ■ Others Components ■ (AAA-Type Batteries) User Manual / VIRTUALGUARD Spare Filter Cleaning Brush 2 Battery Remote Control Spare Edge-Cleaning Side Spare Power Brush Cradle Brush (2) Assembling the cleaner _15... -
Page 16: Name Of Each Part
Assembling the cleaner NAME OF EACH PART [ Main unit ] Dust Outlet Operating Button Display Panel Camera VIRTUAL GUARD Sensor Obstacle Sensor Remote Control VIRTUAL GUARD Sensor Sensor Obstacle Sensor Bumper Sensor Front Dust Bin Eject Button Dust Bin Remote Control Dust Outlet Sensor... -
Page 17: Installing The Batteries
Assembling the cleaner NAME OF EACH PART [ Charger (Station) ] Power Lamp Charging Lamp Remote Control Holder Charge Pin Vents Catching Sill [ VIRTUAL GUARd ] Mode Lamp Distance Detection Sensor Main Body Detection Sensor Mode/Power Button Distance Control Switch Installing the batteries ■... -
Page 18: Remote Control
Assembling the cleaner NAME OF EACH PART [ Remote Control ] Power Recharging Auto Spot Directional Start/Stop Buttons (moving backwards is not supported.) Manual Timer/Daily Edge Clock Installing the batteries ■ Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use. - Page 19 Assembling the cleaner NAME OF EACH PART [ Status display Window ] ⓐ ⓑ ⓒ ⓓ dISPLAY PART 1. Number display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. Battery Level Indicator - Charging : Shows the charging progress in 3 steps.
-
Page 20: Installing Robotic Vacuum Cleaner
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALATION ORDER 1. Turning the Power Switch on or off To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the robotic vacuum cleaner, you must first install the charger. -
Page 21: Installing The Charger
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING THE CHARGER Power Lamp Charging Lamp 1. Install the charger on a flat surface. 2. There should be no obstacles 0.5m to the left and right and within 1 m of the front. 3. -
Page 22: Charging
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER CHARGING When the product is initially purchased, the battery is fully discharged, and you must charge the robotic Power Lamp Charging Lamp vacuum cleaner manually. Turn on the Power Switch at the bottom of the product. 1. -
Page 23: About The Battery
✽ Battery information : AA Size Ni-MH, UNION SUPPO, Model HPY, 12 (EA). - This battery is only for Samsung robotic vacuums. It is strictly prohibited to use it for other appliances or for other purposes. - Do not disassemble or modify the battery. -
Page 24: Setting The Time
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER SETTING THE TIME To use the Scheduled Cleaning and daily Cleaning functions properly, setting the time is necessary. You can only set the time using the remote control. You can only set the time using the remote control. ■... -
Page 25: Installing The Virtual Guard
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING THE VIRTUAL GUARD You can confine the robotic vacuum cleaner to Mode Lamp a particular section by using Fence (virtual wall) Distance Detection mode or clean several sections one by one Sensor Main Unit Detection Sensor using Guard (virtual door) mode. - Page 26 (Specifications: Type D (LR20) alkaline batteries ) VIRTUAL GUARD within 30 cm of • You can additionally purchase a VIRTUAL GUARD from the outside walls is recommended. Samsung Electronics customer care Co., Ltd. About the IrdA sensor. [Infrared Signal Priority] ●...
-
Page 27: Using Robotic Vacuum Cleaner
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER STARTING/STOPPING CLEANING You can run or stop all robotic vacuum functions. Each robotic vacuum function only runs when the Power ■ Switch is turned on. When the robotic vacuum is operating, press the ( ■... -
Page 28: Recharging
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER RECHARGING You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button. When the robotic vacuum cleaner is operating, press ■ the ( ) button to cancel the operation and press the Recharging button. -
Page 29: Auto Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER AUTO CLEANING The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once. If cleaning begins when the robotic vacuum cleaner is docked with ■ the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving. -
Page 30: Spot Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SPOT CLEANING You can conveniently clean a specific area that has a a About 1.5m lot of cookie crumbs, dust, and etc. Move the robotic vacuum cleaner to the location where you ■... -
Page 31: Max Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER MAx CLEANING The robotic vacuum cleaner automatically moves and cleans until the battery runs out and the battery level flashes only one level. If cleaning begins when the robotic vacuum cleaner is ■... -
Page 32: Manual Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER MANUAL CLEANING You can move the robotic vacuum cleaner to clean a particular location directly by using the remote control. Move the robotic vacuum cleaner to the location where you ■ want to perform manual cleaning. You can manually clean using the remote control only. -
Page 33: Edge Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER EDGE CLEANING When the Obstacle Sensor detects an obstacle during the cleaning, the Robot vacuum Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact. It cleans the corners by reaching to them as close as possible. -
Page 34: Scheduled Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SCHEDULED CLEANING You can schedule robotic vacuum cleaner to start cleaning from a particular time. Scheduled cleaning is only performed when robotic ■ vacuum cleaner is docked with the charger station. (Example) Main unit button Remote control button Configuration Sequence... -
Page 35: Setting Daily Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SETTING DAILY CLEANING You can schedule the cleaning robot to start cleaning everyday from a particular time. Daily cleaning is only performed when the cleaning robot ■ is docked with the charger station. (Example) Main unit button Remote control button... -
Page 36: Cleaning Robotic Vacuum Cleaner
Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER PLEASE KEEP THE CLEANING AND MAINTENANCE METHODS IN MIND When the Power Switch is damaged, please contact ■ the service agent so that it does not cause any accidents. Do not use any means or mechanical devices not ■... -
Page 37: Cleaning The Dust Bin And The Filter
Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER EMPTYING DUST QUICKLY You can easily empty the dust bin using a normal vacuum ■ cleaner, without separating the dust bin. 1. Open the dust outlet cover. 2. If you hold the air inlet of the vacuum cleaner to the dust outlet, it will vacuum the dust directly from the dust bin. - Page 38 Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER 4. Wipe the dust from the filter and the dust bin. ✽ You can wash them with water. 5. Install the filter into the dust bin. - Make sure that the grid pattern of the filter is facing downwards.
-
Page 39: Cleaning The Power Brush
Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE POWER BRUSH You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. ● Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power CAUTION brush. - Page 40 Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER 6. After inserting the 3 tips at the top of the cover, push the other end in until it “clicks” into place. ● To prevent the robotic vacuum cleaner from becoming clogged, be careful not to vacuum tooth picks or cotton swabs.
-
Page 41: Cleaning The Edge-Cleaning Side Rotating Brush
Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. -
Page 42: Cleaning The Driving Wheel
Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE DRIVING WHEEL You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. If the robotic vacuum cleaner suddenly starts to zigzag, there ■... -
Page 43: Checklist Before Svc Calls
Troubleshooting CHECkLIST BEFORE SVC CALLS SYMPTOM CHECkLIST MEASURE TO TAkE • Is the dust bin assembled? • Install the dust bin. Robotic vacuum • • Is the Power Switch Turn on the Power Switch. cleaner does not turned on? operate at all Is cleaning mode ( ) in the •... - Page 44 Troubleshooting CHECkLIST BEFORE SVC CALLS SYMPTOM CHECkLIST MEASURE TO TAkE Robotic vacuum • Check whether the power cleaner cannot plug of the charger is plugged correctly into the outlet. find the charger. • If there are any obstacles within a range of about 1m in front of the charger and about 0.5m range to the left and right of the charger, you should remove the...
-
Page 45: Troubleshooting For Error Codes
Troubleshooting TROUBLESHOOTING FOR ERROR COdES ERROR CAUSE SOLUTION COdE • Robotic vacuum cleaner is • Turn off the Power Switch at the bottom caught, stuck or trapped while and move the robotic vacuum cleaner to a navigating. different location. • A foreign substance (string, •... -
Page 46: Product Specification
Product specification 93 mm (Height) 355 mm (Length) 355 mm (Width) Main Body 122 mm (Height) 275 mm (Width) 161 mm (Length) Charger(Station) 46_ Product specification... - Page 47 Product specification CLASSIFICATION ITEM dETAIL Diameter 355mm Mechanical Height 93mm Specifications Weight 4.0kg Power voltage AC220-240V~, 50-60Hz Charge power consumption 50 W Electrical Specifications Main unit power consumption 40 W Battery specifications 14.4V / 2,000 mA Dust bin capacity About 0.6 ℓ Auto Charging/Manual Charging type Charging...
- Page 48 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country ☎ Web Site Customer Care Center AUSTRALIA 1300 362 603 www.samsung.com www.samsung.com/hk HONG KONG (852) 3698-4698 www.samsung.com/hk_en/...