Table of Contents
Advertisement
Messages and Signals
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
MEMORY PRINTING
NO DATA
OFF HOOK
ON HOOK DIAL
OVER HEAT
PRINT HEAD FAIL/
YOU NEED SERVICE
(alternating messages)
READY TO SEND
RECALLING
82
The memory is full.You may have too many
messages recorded in the answering machine. To
erase messages, see page 30.
This message may also occur during fax reception if
too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional
message will indicate the problem), resolve the
problem so that printing can continue (see Substitute
Reception to Memory on page 66). If you are
attempting to transmit from memory, see If the
memory becomes full on page 57. If you are copying,
see If MEMORY IS FULL appears on page 67.
The fax is preparing to or printing out a document
from memory.
This appears if you attempt to search for an auto-dial
number when none have been stored.
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
The
key has been pressed and the fax machine is
waiting for you to dial.
The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 18).
The print head has failed and requires service.
A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.
This appears if you attempt to send a fax by
automatic dialling and the line is busy or the receiving
fax machine does not answer. Your fax machine will
automatically reattempt the call. (See Automatic
redialling on page 54.)
Advertisement
Table of Contents
