Sharp AM-400 Online Manual page 88

Other Fax Transmission Settings
Automatic redialling after a line error
If you use Direct Keypad Dialling, Speed Dialling or Search Dialling to send a
fax and a line error occurs during the transmission, the machine will
automatically redial the number and attempt to complete the transmission.
Retransmission will begin from the page which was being transmitted when
the error occurred. The machine will make one attempt at retransmission after
an interval of two minutes.
♦
To cancel a job that is waiting for automatic redialling, follow the procedure
in Checking and cancelling stored fax jobs on page 79. (When you scroll to
the job during the procedure, the number or name of the destination will
alternate with RECALL: ERROR in the display.)
Recall interval for automatic redialling after a line error
occurs
If desired, you can change the interval after which the machine makes an
automatic redialling attempt when a line error occurs.
♦
The initial setting is "02" minutes.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Press
5
Press
82
) and then press
.
.
.
.
MENU
.
Display:
FAX SETTING
1: AUTO RECALL
1: RECALL [BUSY]
1: RECALL INTERV.
ENTER (01 - 15) 02
RECALL INTERVAL